| Number | Title |
| 1 | Garvey Accumulation table, Model 9700 RIGGING FEE: $150 |
| 2 | 4 ft X 10 ft Stainless steel Accumulation table, all stainless steel construction, stainless steel |
| 3 | Ambec Combiner, 8 ft long X 12 in wide feed conveyor -overlapping 8 ft long X 8 in wide conveyor - |
| 4 | 34 in X 34 in Mat Chain Conveyor,all stainless steel construction, stainless steel motor and gearbox |
| 5 | 10 in wide X 36 in long Mat Chain Conveyor, all stainless steel construction, stainless steel |
| 6 | 12 in wide X 5 ft long Mat Chain Conveyor, all stainless steel construction, stainless steel motor |
| 7 | 10 in wide X 52 in long Mat Chain Conveyor, all stainless steel construction, stainless steel |
| 8 | 10 in wide X 11 ft long Mat Chain Conveyor, all stainless steel construction, stainless steel |
| 9 | 3 pc. 12 in wide Mat Chain Conveyor frame with a 90 degree curve and 35 ft overall length, all |
| 10 | 16" wide X 14-1/2' long mild steel roller conveyor RIGGING FEE: TBD |
| 11 | Tekkra Singulator, RIGGING FEE: TBD |
| 12 | 10 in wide X 20 ft long stainless steel roller conveyor RIGGING FEE: TBD |
| 13 | 12 in wide X 26 in long Dorner belt conveyor, 2200 Series RIGGING FEE: $50 |
| 14 | 3.25 in X 14 ft long vaccuum conveyor RIGGING FEE: TBD |
| 15 | 20 in overall width X 7 ft long dual Mat Chain Conveyor, has new, solid, 20 in wide mat chain in box |
| 16 | 3-1/2 in wide X 7 ft long Dorner belt conveyor, 3100 Series RIGGING FEE: TBD |
| 17 | 10 in wide X 6 ft long Dorner belt conveyor, 2100 Series RIGGING FEE: TBD |
| 17A | Pallet of assorted conveyors |
| 18 | Hi-Speed Checkweigher, Model CS3400GI-MM MicroMate RIGGING FEE: $50 |
| 19 | Label-Aire Model 2111-M labeler, S/N: 6-95168710, operable RIGGING FEE: $50 |
| 20 | Label-Aire Model 2111-M labeler, S/N: 6-15539109, operable RIGGING FEE: $50 |
| 21 | Label-Aire Model 2111-MLH labeler, S/N: 6-11309105 RIGGING FEE: $50 |
| 22 | Inline Filling Systems Single head filler, Semi-Automatic Pneumatically operated over flow |
| 23 | 8 hd Norland Pressure-overflow filler, Model BF3000 RIGGING FEE: $50 |
| 24 | Sonic Air Air Knife system, All new plexiglass guard, Clean, 10 ft Conveyor, M/N: 85 |
| 25 | Loveshaw/Little David Case Erector, Model CF40, S/N: 2819440T RIGGING FEE: TBD |
| 25A | Belcor Pneumatic case erector, M/N:Bel 505, S/N: 5055-092492 RIGGING FEE: $50 |
| 26 | OK Durable case erector. Bottom tape only, Speeds up to 10 cpm, 120 volt VAC single phase, |
| 26A | Belcor Pneumatic case erector, M/N:Bel 5055, S/N: 505G-070410 RIGGING FEE: $50 |
| 27 | McDowell 201 right hand case erector. Needs a little work to get it back up and running. Capable |
| 28 | McDowell 201 right hand case erector. Needs a little work to get it back up and running. Capable |
| 29 | Pace BAO Bottle Orientor, S/N: 779, for F-style bottles RIGGING FEE: TBD |
| 30 | Cousins Pallet Wrapper, M/N: HP2100 RIGGING FEE: TBD |
| 31 | Gap Transporter RIGGING FEE: $50 |
| 33 | Consolidated Capper M/N: D-6-F, with machine mounted sorter, fixed head, comes with 8 ft long x 3.25 |
| 34 | Resina Capper, M/N: S-30, Direction of travel is from left to right, set up for 28 mm flat cap. 11 |
| 35 | Resina Capper, M/N: S-30, Direction of travel is from left to right, set up for 22 mm x .60 in |
| 36 | Zalkin rotary 8 head ROPP capper. Overall foot print with guarding in place is 48” right to left x |
| 37 | Mild steel cap elevator, on casters, stainless hopper and contact points RIGGING FEE: $200 |
| 38 | Mild steel Hoppmann cap elevator with stainless steel contact points. 96 in discharge height. Belt |
| 39 | Mild steel cap elevator with stainless steel contact points. 96 in discharge height. Belt is 6 in |
| 40 | One of 3 matching Nice stainless steel bottle elevator. Discharge height is 96 in. Hopper size 44 in |
| 41 | One of 3 matching. Nice stainless steel bottle elevator. Discharge height is 96 in. Hopper size 44 |
| 42 | One of 3 matching. Nice stainless steel bottle elevator. Discharge height is 96 in. Hopper size 44 |
| 43 | Hoppmann stainless steel bottle elevator. Discharge height is 61 in, has 44 in long x 22 in wide |
| 44 | CIS ConFab cap elevator, Discharge height is 104 in, height to top of hopper is approximately 40 in, |
| 45 | Mild Steel Cap Elevator. 84 in discharge height. Belt is 7 in wide with 2.5 in tall cleats on 6.5 in |
| 46 | Stainless Steel cap elevator, Consolidated, EA-7, 96 in discharge. Belt is 9 in wide with 2 in |
| 47 | Consolidated, EA-8, Mild steel cap elevator. 96 in discharge height. Belt is 9 in wide with 2 in |
| 48 | Stainless Steel cap elevator, RIGGING FEE: $200 |
| 49 | New England low profile Bottle Unscrambler, 36 in sorting bowl last running 1-1/2 in dia bottle, |
| 51 | Omega Bottle Unscrambler, Model 3D-JH, S/N: 90J-13224 RIGGING FEE: $50 |
| 52 | Expandable Skate conveyor, Extended = 25 ft X 18 in, Collapses to 6 ft RIGGING FEE: TBD |
| 53 | Expandable Skate conveyor, Extended = 9 in X 18 in, Collapses to 30 in RIGGING FEE: $50 |
| 54 | Simplex Filler tank, 2 port, 2 in connections, 42 in long X 22 in deep |
| 55 | 20 gal Stainless Steel single walled kettle RIGGING FEE: $50 |
| 55A | 75 gal Stainless Steel single walled tank RIGGING FEE: $50 |
| 56 | 100 Gal Electric Heated processing kettle RIGGING FEE: $50 |
| 57 | 50 Gal Stainless Steel single walled tank RIGGING FEE: $50 |
| 58 | Small Plastic (Teflon?) Murzan diaphrgm pump RIGGING FEE: TBD |
| 58A | Small diaphragm pump RIGGING FEE: TBD |
| 58B | Small diaphragm pump RIGGING FEE: TBD |
| 59 | Husky Diaphragm pump, Model 2150 Sanitary Aluminum construction RIGGING FEE: TBD |
| 60 | Murzan Diaphragm pump, Model PI ODL Stainless steel RIGGING FEE: TBD |
| 61 | Centrifugal Pump, head only, belt driven RIGGING FEE: TBD |
| 62 | Waukesha Cherry Burrel pump on rolling cart. Motor is 1 hp, 230/480 volts, 1740 rpm RIGGING FEE: |
| 64 | Lightnin Mixer with 5 ft- 6 in impeller, Model XJC-87 RIGGING FEE: TBD |
| 64A | Lightnin Mixer with 5 ft- 6 in impeller, Model XJC-87 RIGGING FEE: TBD |
| 65 | Hayward Gordon Mixer, Model GX-12, 48 in Impeller RIGGING FEE: TBD |
| 65A | Aquafine UV Light, Model CSL-45, SN: IS92003, 2 inch fitting, 110 volt power, 29,302 hours RIGGING |
| 65B | Aqufine UV light, 2 inch fitting, 110 volts RIGGING FEE: $50 |
| 66 | US Bottlers pocket sorter. Last running 28 mm and 33 mm TE caps. RIGGING FEE: $50 |
| 67 | Pneumatic Scale Horizontal cap sorter with rectifier Box. Currently set up for 83 mm cap. This cap |
| 68 | Hoppmann FT-40 centrifugal feeder RIGGING FEE: $50 |
| 69 | Hoppmann FR-30 centrifugal feeder RIGGING FEE: $50 |
| 70 | 36 in Consolidated Horizontal sorter RIGGING FEE: $50 |
| 71 | 36 in Consolidated Horizontal sorter RIGGING FEE: $50 |
| 72 | 36 in Consolidated Vertical Sorter RIGGING FEE: $50 |
| 73 | 36 in Consolidated Vertical Sorter with pre-feeder RIGGING FEE: $50 |
| 74 | Pneumatic Scale 3A sorter RIGGING FEE: $50 |
| 75 | Hoppmann FT-50 centrifugal feeder RIGGING FEE: TBD |
| 76 | Zalkin Vertical, machine mounted sorter RIGGING FEE: $50 |
| 77 | Resina Machine mounted sorter, Pin dial RIGGING FEE: $50 |
| 78 | Consolidated Machine mounted vertical sorter with hopper extention RIGGING FEE: $50 |
| 79 | Consolidated Machine mounted vertical sorter RIGGING FEE: $50 |
| 80 | Zalkin Vertical, machine mounted sorter RIGGING FEE: $50 |
| 81 | Owen's Illinois cap blower, 110 V all stainless steel, 30 in x 30 in x 34 in high hopper, Series 111 |
| 82 | Stainless Steel cap pre-feeder with vibrator, 20 in x 20 in RIGGING FEE: $50 |
| 83 | Stainless Steel cap pre-feeder, 20 in x 24 in RIGGING FEE: $50 |
| 84 | Inline Filling Systems 24 in vibratory bowl, stainless steel RIGGING FEE: $50 |
| 85 | Service Engineering 24 in vibratory bowl, stainless steel RIGGING FEE: $50 |
| 86 | 24 in Vibratory bowl on stand, stainless steel RIGGING FEE: $50 |
| 87 | 24 in Vibratory bowl on stand, stainless steel RIGGING FEE: $50 |
| 88 | 24 in Vibratory bowl on a table RIGGING FEE: $50 |
| 89 | 12 in Vibratory bowl, stainless steel RIGGING FEE: $50 |
| 90 | 15 in Vibratory bowl RIGGING FEE: $50 |
| 91 | 15 in Vibratory bowl RIGGING FEE: $50 |
| 92 | 22 in Vibratory bowl RIGGING FEE: $50 |
| 93 | 10 in Vibratory bowl on stand, stainless steel RIGGING FEE: $50 |
| 94 | 16 in Vibratory bowl RIGGING FEE: $50 |
| 95 | 12 in Performance Feeders Vibratory bowl, stainless steel, controls RIGGING FEE: $50 |
| 96 | 15 in Vibratory bowl, has vibrator and assorted other parts RIGGING FEE: $50 |
| 97 | Little David top and bottom case taper, M/N: 3SB RIGGING FEE: $50 |
| 98 | Abal top and bottom Large case case taper, M/N: LC100 RIGGING FEE: $50 |
| 99 | 3M Top and bottom case taper, M/N: 2A18000 RIGGING FEE: $50 |
| 100 | 3M Case Taper, no tape heads, M/N: 200A 29200 RIGGING FEE: $50 |
| 101 | Loveshaw top and bottom Case Taper, M/N: 3C RIGGING FEE: $50 |
| 102 | 3M top and bottom case taper, M/N: 22A18500 RIGGING FEE: $50 |
| 103 | Loveshaw top and bottom Case Taper, M/N: SP304 RIGGING FEE: $50 |
| 104 | 3M top and bottom Case Taper, Model 12A RIGGING FEE: $50 |
| 105 | 3M top and bottom Case Taper, M/N: 700R RIGGING FEE: $50 |
| 106 | Abal top and bottom Large case case taper, M/N: 100 RIGGING FEE: $50 |
| 107 | Little David top and bottom case taper, M/N: 3LD7DM-50 RIGGING FEE: $50 |
| 108 | Little David top and bottom case taper, M/N: 3LD7DM-60 RIGGING FEE: $50 |
| 109 | Little David top and bottom case taper, M/N: LD7D RIGGING FEE: $50 |
| 110 | 3M top and bottom case taper, Model 77RKS RIGGING FEE: $50 |
| 111 | Wilton top and bottom case taper, automatic, new motor RIGGING FEE: $50 |
| 112 | BestPack bottom only case taper RIGGING FEE: $50 |
| 113 | Little David top and bottom case taper, M/N: LD7DM RIGGING FEE: $50 |
| 114 | Little David top and bottom case taper, M/N: LDRTB/3 RIGGING FEE: $50 |
| 115 | Little David top and bottom case taper, M/N: LD7DM RIGGING FEE: $50 |
| 116 | PDC Neck Bander/Sleever. Model 50-E, Was originally set up as a sleever for 170 cc and 100 cc |
| 116A | PDC Neckbander, Model 75C-M, 120-240 volt, 25 amps. 36" long timing screw kit. Foot print is 60" x |
| 117 | (2) Loveshaw Tape heads RIGGING FEE: TBD |
| 118 | (2) Loveshaw Tape heads RIGGING FEE: TBD |
| 119 | (1) Loveshaw Tape head RIGGING FEE: TBD |
| 120 | (2) Tape heads RIGGING FEE: TBD |
| 121 | (1) Tape head RIGGING FEE: TBD |
| 122 | (1) 3M Tape head RIGGING FEE: TBD |
| 123 | (1) 3M Tape head RIGGING FEE: TBD |
| 126 | Lot of Castors RIGGING FEE: TBD |
| 127 | Lot of Castors RIGGING FEE: TBD |
| 128 | Lot of Castors RIGGING FEE: TBD |
| 129 | Lot of Castors RIGGING FEE: TBD |
| 130 | Impulse sealer, 18 in sealing bar RIGGING FEE: $50 |
| 131 | Impulse sealer, 12 in sealing bar RIGGING FEE: $50 |
| 132 | Impulse sealer, 18 in sealing bar RIGGING FEE: $50 |
| 133 | OAL Heat Tunnel, 4 3/4 in X 6 in Opening, 48 in long RIGGING FEE: $50 |
| 134 | Heat Tunnel, 12 in x 9 in x 18 in, 12" wide belt, 33 in Overall length RIGGING FEE: $50 |
| 135 | Aegis Scale, 2,500# capacity, 36 in square RIGGING FEE: $50 |
| 137 | Roach Powered Roller conveyor, 3 pcs RIGGING FEE: TBD |
| 137A | 8 pieces of new gravity roller 90's RIGGING FEE: TBD |
| 138 | Label rewinder, 16" spool RIGGING FEE: TBD |
| 139 | Pnuematically controlled bottle stop |
| 140 | (22) Filamatic Piston Filler nozzles |
| 141 | Valco cold glue pot and applicator |
| 142 | Slaughterback hot glue unit on stand, some extra parts |
| 143 | Slaughterback hot glue unit |
| 144 | Slaughterback hot glue unit |
| 145 | Melton hot glue unit on stand |
| 146 | Dorm refrigerator |
| 147 | Dorm Refrigerator |
| 149 | Microwave |
| 150 | Counter-top Convection oven |
| 151 | Lot of conveyor chain |
| 152 | Asst lot of hairnet bins, soap dispensers, paper towel holders, broom head, misc |
| 154 | Leaf Vaccuum |
