Online Only Auction - Equipment Formerly of LabWorks

May 10, 2020, 7:04 am

≫ Next: Online Only: REAL ESTATE AUCTION

≪ Previous: AVAILABLE NOW - Surplus Equipment from the Ongoing Operations of MILLERCOORS

$

0

0

Online Only Auction - Equipment Formerly of LabWorks Vehicles, Test & Shop Equipment, Sterilizers and Spare Parts
	Online Bidding Only Begins: Tuesday, May 26, 2020 at 12:00 PM CDT Location: 102 Hamilton Drive #B, Novato , CA, US, 94949 FEATURES: Vehicles, Test and Shop Equipment, Sterlizers and Spare Parts
Sale Managed in Partnership with Rabin  Inspection by Appointment Only.  Please contact: Hazel Tria: 415.717.5974 hazel.tria@rabin.com or Sam Reese: 415.497.8643 sam.reese@rabin.com Click Here for Equipment List, Photos and Internet Bidding Motor Vehicles: 2015 Ford XLT Transit Service Van, 84,000 miles 2013 Ford XLT Transit Service Van, 103,000 miles 2010 Ford Explorer 4×4 SUV, 110,000 miles 2007 Ford F350 Super Duty Diesel Flatbed Truck  Test & Shop Equipment Miller Maxstar 150S tig welder; Uniweld burning sets Fluke 9100S dry well meters & Infrared 566IR thermometer Ridgid CA-100 micro inspection camera & Fluke clamp testers Lasermark mini laser cross level; Omega therma coupler set Rigid & Milwaukee power tools; Assorted hand tools Salisbury protective gear sets; Dayton pallet movers Sterilizers and Spare Parts Primus pass through sterilizer, model PSS5-G-MSDD Tomy ES-315 autoclave; Barnstead water sterilizer New spare replacement parts by Steris,Tuttnauer & Midmark Additional parts for Primus, Consolidated, Lancer & Asco Assorted probes, pressure gauges, plus gas analyzers Fasteners, copper tubing, pipe fittings, shelving units
Click here for more information.

---

Online Only: REAL ESTATE AUCTION

May 13, 2020, 6:36 am

≫ Next: Negotiated Sale: Available Immediately

≪ Previous: Online Only Auction - Equipment Formerly of LabWorks

$

0

0

Online Only: REAL ESTATE AUCTION Industrial Sites in Colorado & Texas
	Online Bidding Only Begins: Tuesday, June 09, 2020 at 10:00 AM CDT Location: Online Real Estate Auction, Tyler, Tx & Canon City, CO, US,
LOT 4000 -- $600,000 Reserve for Property -- Sold Subject to Seller Confirmation -- Tyler, TX 75706. Industrial facility with 18' ceiling, dual overhead doors and indoor dock, approximately 25,686 square feet, on 1.99 acres, with 3 phase power. Remodeled office with bathroom, shower, and lunch / meeting room. Recent improvements include, addition of infrared heaters in warehouse, insulation of warehouse, remodeled office/bathroom/lunchroom, improvement of lot etc. See Important Information & Terms of Sale for complete details about the sale, location.  Available Real Estate -- address Texas 11696 Laney Rd Tyler, TX 75706 Click here to see Bidspotter Link for Lot 4000      LOT 2000 --  $600,000 Reserve for Property -- Sold Subject to Seller Confirmation -- Located in Canon City, CO -- THIS INDUSTRIAL PROPERTY is located just off of Forge Road in southwest Canon City. The property consists of 5.78 business zoned acres, a 56,279 sq. ft., single story heavy industrial building with dual overhead 5 ton cranes, 20x18 Paint Booth, 28x13 Sand Blasting room and a separate 4,922 sq. ft. single story office building for a total building area of 61,201 sq.ft. There is 230/460 electric service to several places in the building.  See Important Information & Terms of Sale for complete details about the sale, location.   Available Real Estate -- address Colorado    CME 1610 Fry Ave Canon city CO 81212   CME 1675 Fry Ave Canon City CO 81212   Click here to see Bidspotter link for Lot 2000
Click here for more information.

Negotiated Sale: Available Immediately

May 14, 2020, 8:03 am

≫ Next: Online Only Auction - Surplus Assets of The Standard Register Co.

≪ Previous: Online Only: REAL ESTATE AUCTION

$

0

0

Negotiated Sale: Available Immediately Weissbach Candle Manufacturing and Plant Support Equipment
	Override: Sort by this Date/Time Begins: Friday, June 22, 2029 at 11:00 AM CDT Location: 121 Hunter Ave, Saint Louis, MO, US, 63124 Surplus Assets to the Ongoing Operations of a Major Candle Manufacturer. Please contact Josh at joshs@schneiderind.com for pricing or more information.
Available Immediately! Contact Josh at joshs@schneiderind.com for more information. 1) Weissbach Pillar Extruding Line 2) Weissbach Votive Press 3) Weissbach Taper Extruding Line, 16 Up Over Dipper 4) Weissbach Powder Production Drum, 800 Kg/h (Qty 10) 5) Weissbach Continuous Drawing Machine 6) GE Transformer, SN P104153-DS00778001 7) Fork Truck Battery Charging Station 8) Hyster E50XL-33 Electric Forklift, SN C100VI050SK  9) Overhead Crane, 4000LB Capacity 10) Bale Breaker 11) Marley Cooling Tower, Model NC7221GS, SN 117808-001-97 12) Paper Shredder  13) Steelcraft Dust Collector 14) United Technologies Carrier Centrifugal Water Chiller, Model 19DK71313CM, SN 41681 15) Kewanee Boiler, Model HM884, SN 19564 16) Ajax Boiler, Model WRFC-3770, SN 64854 17) Carrier Evergreen Chiller, Model 23XR5050NTRRCC5, SN 69630
Click here for more information.

Online Only Auction - Surplus Assets of The Standard Register Co.

May 15, 2020, 6:44 am

≫ Next: AVAILABLE NOW - Surplus Equipment from the Ongoing Operations of MILLERCOORS

≪ Previous: Negotiated Sale: Available Immediately

$

0

0

Online Only Auction - Surplus Assets of The Standard Register Co. Facility Support and Auxiliary Equipment & Machinery
	Online Bidding Only Begins: Thursday, June 11, 2020 at 10:00 AM CDT Location: 2700 Armstrong Road, Fayetteville, AR, US, 72701 Features: Atlas Copco Air Compressor GE Busbar GE Transformers Dayton Heaters Quincy Air Compressors U.S. Air Force Diesel Generator Battery Chargers Ajax Boiler Carrier Chiller Fulton Boiler Allen-Bradley MCC Prisco Tech Water Softner System
Number Description 1 Van Air Systems Inc. Compressed Air Dryer, Model# EMD 1600, Serial# 05G-D02279, 7.5 HP, 460 V, 3 Phase 2 Siemens MCC, 3057 Hours 3 Pallet of Miscellaneous Electrical Components  4 Pallet of Miscellaneous General Electric Transformers  5 Pallet of 4 General Electric Switch Boxes 6 Pallet of 14 Miscellaneous Electical Boxes 7 Pallet of 7 Misccelaneous Electrical Boxes 8 Pallet of 12 Electrical Switch Boxes 9 Pallet of 3 Electrical Boxes 10 Pallet of Miscellaneous Electrical Components  11 Pallet of 8 Misccelaneous Electrical Boxes 12 Pallet of Miscellaneous Cutler-Hammer Electrical Components  13 Pallet of Miscellaneous General Electric Boxes 14 Pallet of Miscellaneous Electrical Components  15 General Electric Bus Bar, Qty 47, 11 ft long x 1 ft wide x 6 inches deep (All Pictured) 16 Ford F-250 Super Duty Crew Cab, 376,702 Miles 17 Marley Cooling Tower 18 NCSERIES Cooling Tower 19 General Blower Co Cooling Coils, Model# AFC34CYOE41, Serial# 438876-01B 21 General Eletric Transformer, Model# 9T23Y3102, Serial# 9930714, 480 HV, 120 LV, 3 Phase, 60 Cycles 22 General Eletric Transformer, Model# 9T23Y3102, Serial# 9928330, 480 HV, 120 LV, 3 Phase, 60 Cycles 23 General Eletric Transformer, Model# 9T23Y3102, Serial# 9930726, 480 HV, 120 LV, 3 Phase, 60 Cycles 24 General Eletric Transformer, Model# 9T23Y3102, 480 HV, 120 LV, 3 Phase, 60 Cycles 25 General Eletric Transformer, Model# 9T23Y3102, Serial# 9930725, 480 HV, 120 LV, 3 Phase, 60 Cycles 26 General Eletric Transformer, Model# 9T23Y3102, Serial# 9928343, 480 HV, 120 LV, 3 Phase, 60 Cycles 27 General Eletric Transformer, Model# 9T23Y3102, Serial# 9930724, 480 HV, 120 LV, 3 Phase, 60 Cycles 28 General Eletric Transformer, Model# 9T23Y3102, Serial# 9930710, 480 HV, 120 LV, 3 Phase, 60 Cycles 29 Square D Company Transformer, Style# 35149-28212-014, Cat# 150T6H, 480 HV, 240 LV 30 General Electric Transformer, Model# 9T23A3872, 480 HV, 120 LV 31 Square D Company Transformer, 3 Phase, Cat# 30TQ34803, 460 HV, 220 LV 32 Square D Company Transformer, Cat# 30T3H, 480 HV, 120 LV 33 (2) Transformers: IEC Autotransformer, 3 Phase, 480 HV, 240 LV; Acme Transformer, Catalog# T-2-53516-3S, 480 HV, 120 LV 36 Miscellaneous Electrical Transformers (All Pictured) 37 Square D Company Transformer, Single Phase, Style# 12151-12625-005, Cat# 751F, 480 HV, 220 LV 38 General Electric Transformer, Single Phase, Catalog# 9T21B9102G03, 240 HV, 120 LV 39 Janitrol Heater for Industrial/ Commercial Use 40 Janitrol Heater for Industrial/ Commercial Use, Serial# 94JH5414R, 115V, Single Phase 41 Dayton Heater, Model# 3E228D 42 Dayton Heater, Model# 3E228D, Serial# J98G015164, 100,000 BTU, 115V, Single Phase 43 Dayton Heater, Model# 3E228D, Serial# A98G003842, 100,000 BTU, 115V, Single Phase 44 Reznor Heater, Model# F400-E, Serial# AYJ65M6N98276X, 115 V 45 Janitrol Heater for Industrial/ Commercial Use, Serial# 94JH5413R, 115V, Single Phase 46 Dayton Heater, Model# 3E230, Serial# 08117614, 120,000 BTU, 115V, Single Phase 47 Dayton Heaters, Qty 4, Model# 5VD65A, 25V, 90,000 BTU 48 Dayton Heater, Model# 3E228D, Serial# A98G003821, 100,000 BTU, 115V, Single Phase 49 Dayton Heater, Model# 3E228D, Serial# Q9151880, 125,000 BTU, 115V, Single Phase 50 Metal Cage Cart 51 Quincy Air Compressor, 64,028.2 Hours 52 Quincy Air Compressor, 53,947.2 Hours 53 Arrow Pneumatics Hydraulic Pump, Model# 3510-1, Serial# PF211, 115V, Single Phase, .75 HP 54 Atlas Copco Air Compressor, Type GX4 FF CSA/UL, Product# 8152101260, Serial# AII648712, 460V, Year 2006 55 U.S. Air Force Diesel Generator on Wheels, 72 KW, 400HZ, Generator Set Type A/M32A-86D, Registration# 6115-86-AZZ-2751, 320.2 Hours 56 MTC Gantry Crane w/ Coffing 2 Ton Hoist, 4000 lbs capacity 57 C&D Battery Charger, Serial# DWD-6, Model# AR15C/E510, 240/460V Input, 37.2 V Output, Single Phase 58 C&D Battery Charger, Serial# DPI-972636, Model# FR18HK640M, 240/460V Input, 36 V Output, 3 Phase 59 C&D Battery Charger, Serial# K PIU814920, Model# FR18H/K850, 240/460V Input, 36 V Output, 3 Phase 60 Battery Charging Station Metal Rack 61 Battery Charging Station Metal Rack 62 United Technologies Carrier Centrifugal Water Chiller, Model# 19DY71313CM, Serial# 41681, 460V, 3 Phase, 60 Hz, R-11 Refrigerant, 3691 Hours 63 Kewanee Scott Boiler, Model# H/884, Serial# 19564, 546,500 BTU Output 64 Ajax Boiler w/ Power Flame Burner, Forced Draft Gas Fired Water Heating Boiler, Model# WRFG-3770, Serial# 64854, 3,129,100 BTU/Hour Output 65 Cutler-Hammer MCC 66 Carrier Chiller, Model# 23XR5050NTRRCC5, Serial# 69630, 460V, 3 Phase, 60 Hz 67 Steel Tank 68 GE Transformer, Serial# P104153-DS00778001, NEMA Class AA Dry Type Transformer, 1000/1333 KVA, 12,470 HV, 480 LV, 3 Phase, Approximate Weight 7,000 lbs 69 Fulton Fuel-Fired Steam Boiler, Boiler# 49132, National Board# 49132, Model# FB-030-F, 1035 lbs Steam/ Hour 70 Server Racking Cage 71 Server Box 72 Server Box 73 Allen-Bradley MCC, Catalog# SN-K CTWZ83/1, 600 VAC, 3 Phase 74 Cornell Dubilier Capacitor, 480 V, 3 Phase, 60 Hz 75 ABB Electrical Switches, Qty 2, Part# PL342SB225T1N1, 480V, 50/60 Hz, 3 Phase 76 ABB Electrical Switches, Qty 2, Part# PL342SB225T1N1, 480V, 50/60 Hz, 3 Phase 77 General Electric A-Series Panelboard, Cat# AF43S 78 Blower 79 Pallet w/ (3) Circular Fans and (1) Industiral Overhead Light 80 Pallet of Circular Fans, Approximately 5 Fans 81 Pallet of Circular Fans, Approximately 8 Fans 82 Pallet of Circular Fans, Approximately 5 Fans 83 Pallet of Circular Fans, Approximately 5 Fans 84 Pallet of Commercial Overhead Lighting 85 Pallet of Commercial Overhead Lighting 86 Pallet of Commercial Overhead Lighting 87 Pirsco Tech Complete Water Softening System (All Pictured) 88 Rheem Marathon Water Heater 89 Pallet of Kearney Electrical Supplies 90 Floor Scale w/ Digital Readout 91 Floor Scale w/ Digital Readout 92 Van Air Systems Inc Tank, Model# VME-2000, Serial# 113515 93 Pallet of Butterfly Valves, Approximate Qty 10 94 Walk Behind Floor Cleaner 95 Pallet of Rotary Brushes 96 Walk Behind Floor Cleaner 97 Riding Floor Cleaner, 646.7 Hours 98 Speedaire Regrigerated Dryer and Honeywell Air Compressor, O.S.# W0200B1CP2 99 DeWalt Pressure Washer and Model PG 101-2 100 DeWalt Pressure Washer, 4200 PSI 101 Pallet of Miscellaneous Pulleys and Cable 102 Pallet of Hoists (All Pictured) 103 Vickers Engineering Sheer, Model# CS-42, Serial# 303 104 Pallet of Carpeting  105 Electric Bander 106 General Electric Busway System, Cat# F3HA12TBIST, 1200 Amp, 600V, 3 Phase (All Pictured) 107 Piping, Approximately 15 ft long x 8 inch diameter (All Pictured) 108 Miscellaneous Scrap Metal (All Pictured) 109 Miscellaneous Piping and Other Metal (All Pictured) 120 Summit Industrial Products ConDePhase Oil/Water Separator
Click here for more information.

AVAILABLE NOW - Surplus Equipment from the Ongoing Operations of MILLERCOORS

May 22, 2020, 9:03 am

≫ Next: Online Only Auction- Surplus Assets from a Major Food Producer

≪ Previous: Online Only Auction - Surplus Assets of The Standard Register Co.

$

0

0

AVAILABLE NOW - Surplus Equipment from the Ongoing Operations of MILLERCOORS BREWERY EQUIPMENT
	Override: Sort by this Date/Time Begins: Friday, November 01, 2030 at 12:16 PM CDT Location: Assets located in USA & CANADA, , ON, CA,
*WELCOME TO THE ORDERLY NEGOTIATIED SALE PAGE* About the Sale: On behalf of the on-going & continuing operations of  MILLERCOORS USA LOCATIONS, Schneider Industries, Inc. is holding an ONGOING ORDERLY NEGOTIATED SALE of the items listed in Catalog below. Items are offered for sale on a First Come, First Serve Basis.   Sale Type: NEGOTIATED SALE. PLEASE CALL SCHNEIDER INDUSTRIES @ 314-863-7711 to discuss immediate PRICING AND AVAILABILITY.
Click here for more information.

Online Only Auction- Surplus Assets from a Major Food Producer

June 4, 2020, 2:56 am

≫ Next: Online Only Auction- Assets Formally of Fibrant - Plant Closure, Fire and Safety Equipment Auction

≪ Previous: AVAILABLE NOW - Surplus Equipment from the Ongoing Operations of MILLERCOORS

$

0

0

Online Only Auction- Surplus Assets from a Major Food Producer Food Processing Equipment - 118 Lots!
	Online Bidding Only Begins: Tuesday, July 14, 2020 at 10:00 AM CDT Location: 1701 W Bradley Ave, Champaign, IL, US, 61821 FEATURES: SS Tanks, Conveyors, LOMA IQ2 Metal Detectros, Lantech Stretch Wrapper, Mettler Toledo CheckWeigher, Waukesha Pump, Easy Lift Equipment, Cincinnati Horizontal Milling, Auger Mixer/Cookers, SS Hopper, Control Panels, Nordson Blue Pots & More!
Surplus Equipment From  Major Food Producer Click HERE for Equipment List, Photos & Internet Bidding  Equipment List: Lot No Description 2 Stainless Single Wall Tank Center Discharge Open Top 3 Stainless Single Wall Tank Center Discharge Closed top With Agitator 4 Stainless Single Wall Tank Center Discharge Closed Top Missing Cover No Agitator 5 Stainless Single Wall Tank Center Discharge Open Top 6 Lot of 4 Load Cells 7 Sweed Scrap Chopper Model 300AD S/N 42235 8 Stainless Single Wall Tank Center Cone Bottom Discharge Open Top 9 Stainless Single Wall Tank Center Discharge Closed Top 10 Loma IQ2 Metal Detector 11 Loma IQ2 Metal Detector 12 Kason Dual Barrel Sifter 13 Sidel Bin Box 14 Lantech Stretch Wrapper  15 Hartness Dynac 6400 Accumulator S/N 64-046 16 Mettler Toledo CheckWeigher 18 Thrush Tube in Shell Heat Exchanger Model S10722A S/N 571654 National Board 92297 21 Ampaco Pump C216MD18T-S S/N CC-73032-2-1 Incomplete 23 Waukesha Pump 25 Spencer Industries Vacuum Model SA-407 S/N 315227 26 Easy Lift Equipment Model EL650DCSLSPS8 Barrel Lift 650 LB Capacity 28 Easy Lift Equipment Model EL650DCSLSPS8 Barrel Lift 650 LB Capacity 29 Vestil Barrel Lift 30 Waukesha Pump Feeder 31 Twin Screw Mixer Feeder Stainless Construction 33 MAS VR2 S/N 4188 Radial Arm Drill 35 Marchant Schmidt Model MS1132001 S/N 2597 Cheese Block Cutter 36 Stainless Control Panel Box 39 Stainless Infeed Conveyor 40 Cincinnati No. 2MI Horizontal Milling Machine S/N 2U2U1Z-68 41 Cherry Burell Processor Tank Side Scrapped Bottom Center Discharge Missing Lid 42 Auger Mixer/Cooker 43 Auger Mixer/Cooker 44 Cleated Belt Conveyor 46 Replacement Coil for Air Handler 58 Nordson (NO PIC) 59 Stainless Hopper 63 Columbia Palletizer Unit 65 Stainless Hydraulic Barrel Dumper 66 Lane Divider Unit 67 GearBox and Drive Motor 68 Titan Inverter Duty Motor 250 Hp 69 250 HP Motor 70 Nordson Glue Pot Model 3500-1EA32/A 71 Incline Cleated Belt Conveyor 72 Pre-Pack Machinery Stainless Bin 73 Sidel Cap Feeder Conveyor 75 Prater Rota-Sieve 76 Electrical Panel 77 Labeler Stand 78 Loma IQ2 Metal Detector S/N MH34044 80 Stainless Powder Dump Hopper 81 Stainless Control Panel Box 82 Control Panel 83 Metal Detector (NO PHOTO) 84 Conveyor 85 Control Panel (NO Photo) 87 Nordson Glue Pot Model 3700V 88 Nordson Glue Pot Model 3700V 89 Buhler Miag 36/38 Rotary Valve 91 SnyderGeneral Blower Fan Model 105 BI CCW 92 Control Panel 93 Accraply Trine Labler Model 4500GS S/N MSN05935 94 Dover/Groen 200 Gallon 316 Stainless Cook Kettle with Agitator 95 Labler Tape Feeder 96 Control Panel 97 HMI Panel on Swing Arm 98 Accraply Trine Heat Tunnel Model 105HT S/N MSN05936 99 Square D 45 KVA Transformer 101 Dodge Quantis Gear Box 8.27:1 102 Dodge Quantis Gear Box 8.27:1 103 Loma Micro S Metal Detector 107 Conveyor 108 Sidel Cap Feeder Hopper 109 Baldor 3 HP Motor 110 Weber Print Applicator Model 5300 111 Nordson Glue Pot Model 3500V 112 Electrical Panel- Just Panel Glue Pot not Included 113 Weber Print Applicator Model 5300 114 Domino DDC3 Coder 115 Domino DDC3 Coder 116 Electrical Panel 117 Control Panel 118 Control Panel 120 Nordson Glue Pot Model 3500-1EA34/D 121 Control Panel 122 Control Panel 123 Control Panel 124 Section Of Pallet Roller Conveyor 126 Section Of Pallet Turn Conveyor 127 Pump and fiberglass Tank 128 Mettler Toledo Metal Detector/Checkweigher Model CM6000XS S/N 14091311 129 Section Of Pallet Roller Conveyor 130 Loma/Lock Model IQ3 Metal Detector 131 Mettler Toledo Metal Detector/Checkweigher 133 FKI Logistex A-780 Palletizer Components 134 FKI Logistex A-780 Palletizer Components 135 Baldor 1 HP Motor 136 SPX Agitator GearBox and Drive Unit 137 Nordon Bracket 139 Stainless Hopper 140 Lot of Plant Ballards/Guard Rails 141 Waukesha/SPX Pump Model 220 UL 142 Waukesha Pump Model 130 S/N 92812 143 Waukesha Pump Model 60 S/N 82310 SS 144 Motor and Gear Box For Pump 145 Waukesha Pump Model 130 S/N 82258 SS 146 Pallet Turn Table 147 DCI 6000 Galon Horizontal Tank Model 90-D-40613-C 148 Posimat air Rinser Model SG30 S/N OC11805.3.02 149 Inline Stainless Filters 150 Inline Stainless Filters 151 Inline Stainless Filters 152 Inline Stainless Filters 153 Dover/Groen 100 Gallon 316 Stainless Cook Kettle Model RA-100 SP 154 Mettler Toledo Metal Checkweigher 155 Control Panel 156 Pallet Conveyor 158 Reliance Motor
Click here for more information.

Online Only Auction- Assets Formally of Fibrant - Plant Closure, Fire and Safety Equipment Auction

June 4, 2020, 2:56 am

≫ Next: Online Only Auction - Surplus Equipment from Pipeline Foods

≪ Previous: Online Only Auction- Surplus Assets from a Major Food Producer

$

0

0

Online Only Auction- Assets Formally of Fibrant - Plant Closure, Fire and Safety Equipment Auction Fire & Safety Equipment
	Online Bidding Only Begins: Thursday, June 18, 2020 at 10:00 AM CDT Location: 1472 Columbia Nitrogen Road, Augusta, GA, US, 30901 Contact Riley M at rileym@schneiderind.com with Questions or to Schedule Inspection Appointment  Features: Multiple Fire Trucks Econol XL Ambulance Bard Manufacturing Blast Resistant Building Ford F-350 3M Powered Air Purifying Respirator
Lot # Lot Description 0 Rigging & Packaging Information Coming Soon. 1 Capital Safety Tripod Chain Hoist, S/N #084061, Model #3400115, DOM = 2007 2 MSE Tripod Chain Hoist, Model #2005 3 MSE Tripod Chain Hoist, Model #2005 4 Tripod Stand (No hoist attached) 5 Tripod Stand (No hoist attached) 6 MSE Tripod Chain Hoist, Model #2005 7 MSE Tripod Chain Hoist, Model #2005 8 Open Circuit, Continous Flow Self Contained Breathing Apparatus, From North Safety Products, Qty. 9 Open Circuit, Continous Flow Self Contained Breathing Apparatus, From North Safety Products, Qty. 10 Open Circuit, Continous Flow Self Contained Breathing Apparatus, From North Safety Products, Qty. 11 Open Circuit, Continous Flow Self Contained Breathing Apparatus, From North Safety Products, Qty. 12 Open Circuit, Continous Flow Self Contained Breathing Apparatus, From North Safety Products, Qty. 13 Open Circuit, Continous Flow Self Contained Breathing Apparatus, From North Safety Products, Qty. 14 Open Circuit, Continous Flow Self Contained Breathing Apparatus, From North Safety Products, Qty. 15 Open Circuit, Continous Flow Self Contained Breathing Apparatus, From North Safety Products, Qty. 16 Open Circuit, Continous Flow Self Contained Breathing Apparatus, From North Safety Products, Qty. 17 Open Circuit, Continous Flow Self Contained Breathing Apparatus, From North Safety Products, Qty. 18 Open Circuit, Continous Flow Self Contained Breathing Apparatus, From North Safety Products, Qty. 19 Open Circuit, Continous Flow Self Contained Breathing Apparatus, From North Safety Products, Qty. 20 Open Circuit, Continous Flow Self Contained Breathing Apparatus, From North Safety Products, Qty. 21 Open Circuit, Continous Flow Self Contained Breathing Apparatus, From North Safety Products, Qty. 22 Open Circuit, Continous Flow Self Contained Breathing Apparatus, From North Safety Products, Qty. 23 Open Circuit, Continous Flow Self Contained Breathing Apparatus, From North Safety Products, Qty. 24 Open Circuit, Continous Flow Self Contained Breathing Apparatus, From North Safety Products, Qty. 25 Open Circuit, Continous Flow Self Contained Breathing Apparatus, From North Safety Products, Qty. 26 Open Circuit, Continous Flow Self Contained Breathing Apparatus, From North Safety Products, Qty. 27 Open Circuit, Continous Flow Self Contained Breathing Apparatus, From North Safety Products, Qty. 28 Open Circuit, Continous Flow Self Contained Breathing Apparatus, From North Safety Products, Qty. 29 Open Circuit, Continous Flow Self Contained Breathing Apparatus, From North Safety Products, Qty. 30 Open Circuit, Continous Flow Self Contained Breathing Apparatus, From North Safety Products, Qty. 31 Open Circuit, Continous Flow Self Contained Breathing Apparatus, From North Safety Products, Qty. 32 Open Circuit, Continous Flow Self Contained Breathing Apparatus, From North Safety Products, Qty. 33 Open Circuit, Continous Flow Self Contained Breathing Apparatus, From North Safety Products, Qty. 34 Open Circuit, Continous Flow Self Contained Breathing Apparatus, From North Safety Products, Qty. 35 Open Circuit, Continous Flow Self Contained Breathing Apparatus, From North Safety Products, Qty. 36 Open Circuit, Continous Flow Self Contained Breathing Apparatus, From North Safety Products, Qty. 37 Open Circuit, Continous Flow Self Contained Breathing Apparatus, From North Safety Products, Qty. 38 Open Circuit, Continous Flow Self Contained Breathing Apparatus, From North Safety Products, Qty. 39 Open Circuit, Continous Flow Self Contained Breathing Apparatus, From North Safety Products, Qty. 40 Open Circuit, Continous Flow Self Contained Breathing Apparatus, From North Safety Products, Qty. 41 Open Circuit, Continous Flow Self Contained Breathing Apparatus, From North Safety Products, Qty. 42 Open Circuit, Continous Flow Self Contained Breathing Apparatus, From North Safety Products, Qty. 43 Open Circuit, Continous Flow Self Contained Breathing Apparatus, From North Safety Products, Qty. 44 Open Circuit, Continous Flow Self Contained Breathing Apparatus, From North Safety Products, Qty. 45 Open Circuit, Continous Flow Self Contained Breathing Apparatus, From North Safety Products, Qty. 46 Open Circuit, Continous Flow Self Contained Breathing Apparatus, From North Safety Products, Qty. 47 Scott Constant Flow Self Contained Breathing Apparatus, Qty. 4 48 Scott Constant Flow Self Contained Breathing Apparatus, Qty. 5 49 Scott Constant Flow Self Contained Breathing Apparatus, Qty. 4 50 Kidde CO2 Fire Extinguisher, Qty. 6 51 Buckeye Fire Extinguisher, Qty. 6 52 Buckeye Fire Extinguisher, Qty. 6 53 Buckeye Fire Extinguisher, Qty. 6 54 Buckeye Fire Extinguisher, Qty. 5 55 Fire Extinguisher, Qty. 16 56 Fire Extinguisher, Qty. 16 57 Fire Extinguisher, Qty. 16 58 Fire Extinguisher, Qty. 16 59 Fire Extinguisher, Qty. 16 60 Fire Extinguisher, Qty. 16 61 Fire Extinguisher, Qty. 16 62 Fire Extinguisher, Qty. 16 63 Fire Extinguisher, Qty. 16 64 Fire Extinguisher, Qty. 16 65 Fire Extinguisher, Qty. 16 66 Fire Extinguisher, Qty. 16 67 Fire Extinguisher, Qty. 16 68 Fire Extinguisher, Qty. 15 69 Fire Extinguisher, Qty. 10 70 Fire Extinguisher, Qty. 3 71 Fire Extinguisher, Qty. 15 72 Fire Extinguisher, Qty. 11 73 Fire Extinguisher, Qty. 22 74 Fire Extinguisher, Qty. 6 75 Fire Extinguisher, Qty. 16 76 Fire Extinguisher, Qty. 14 77 Fire Extinguisher, Qty. 6 78 Fire Extinguisher, Qty. 30 79 Fire Extinguisher, Qty. 6 80 Scott Health and Safety, Oxygen Tank and Protective Mask, Qty. 2 81 Scott Health and Safety, Oxygen Tank and Protective Mask, Qty. 2 82 Scott Health and Safety, Oxygen Tank and Protective Mask, Qty. 2 83 Scott Health and Safety, Oxygen Tank and Protective Mask, Qty. 2 84 Scott Health and Safety, Oxygen Tank and Protective Mask, Qty. 2 85 Scott Health and Safety, Oxygen Tank and Protective Mask, Qty. 2 86 Scott Health and Safety, Oxygen Tank and Protective Mask, Qty. 2 87 Scott Elsa Emergency Life Support Apparatus Tank, Qty. 5 88 Scott Elsa Emergency Life Support Apparatus Tank, Qty. 7 89 Scott Elsa Emergency Life Support Apparatus Tank, Qty. 7 90 Scott Elsa Emergency Life Support Apparatus Tank, Qty. 7 91 Scott Elsa Emergency Life Support Apparatus Tank, Qty. 7 92 Scott Elsa Emergency Life Support Apparatus Tank, Qty. 3 93 Scott Elsa Emergency Life Support Apparatus Tank, Qty. 6 94 Scott Elsa Emergency Life Support Apparatus Tank, Qty. 6 95 Scott Breathing Air Only Emergency Life Support Tank, 2216 PSI, Qty. 4 96 Scott Breathing Air Only Emergency Life Support Tank, 2216 PSI, Qty. 4 97 Scott Breathing Air Only Emergency Life Support Tank, 2216 PSI, Qty. 4 98 Scott Breathing Air Only Emergency Life Support Tank, 2216 PSI, Qty. 4 99 Scott Breathing Air Only Emergency Life Support Tank, 2216 PSI, Qty. 4 100 Arrow XT Fire Truck 101 CFSI Bauer Compressor Tank Filler, Model #VA-8U34606-P31, S/N #130717, DOM 2012 102 Protective Face Mask W/ Slot for Oxygen Valve, Qty. 4 103 Protective Face Mask W/ Slot for Oxygen Valve, Qty. 4 104 Scott Safety Harness and Carrying Pack For Oxygen Tank 105 Scott Safety Harness, Protective Face Mask & Oxygen Tank, Qty. 5 106 Scott Safety Harness, Protective Face Mask & Oxygen Tank, Qty. 5 107 Scott Safety Harness, Protective Face Mask & Oxygen Tank, Qty. 5 108 Scott Safety Harness, Protective Face Mask & Oxygen Tank, Qty. 5 109 Scott Air-Pak 2216 PSI Oxygen Tank & Protective Face Mask, Qty. 2 110 Scott Air-Pak 2216 PSI Oxygen Tank & Protective Face Mask, Qty. 5 111 Scott Air-Pak 2216 PSI Oxygen Tank & Protective Face Mask, Qty. 5 112 Scott Air-Pak 2216 PSI Oxygen Tank & Protective Face Mask, Qty. 2 113 Scott Air-Pak 2216 PSI Oxygen Tank & Protective Face Mask, Qty. 3 114 Scott Air-Pak 2216 PSI Oxygen Tank & Protective Face Mask, Qty. 3 115 Scott Air-Pak 2216 PSI Oxygen Tank & Protective Face Mask, Qty. 3 116 Scott Air-Pak 2216 PSI Oxygen Tank & Protective Face Mask, Qty. 3 117 Scott Air-Pak 2216 PSI Oxygen Tank & Protective Face Mask, Qty. 3 (60 Minute Tank) 118 Scott Air-Pak 2216 PSI Oxygen Tank & Protective Face Mask, Qty. 3 (60 Minute Tank) 119 Scott Air-Pak 2216 PSI Oxygen Tank & Protective Face Mask, Qty. 3 (60 Minute Tank) 120 Scott Air-Pak 2216 PSI Oxygen Tank & Protective Face Mask, Qty. 3 (60 Minute Tank) 121 Scott Air-Pak 2216 PSI Oxygen Tank & Protective Face Mask, Qty. 2 (60 Minute Tank) 122 Scott Air-Pak 2216 PSI Oxygen Tank & Protective Face Mask, Qty. 2 (60 Minute Tank) 123 Scott Breathing Air Cylinders, Qty. 4 124 United Oxygen Equipment Emergency Equipment Oxygen Tank, Qty. 3 125 Life Support Products Inc. Oxygen Tank, Qty. 4 126 Life Support Products Inc. Oxygen Tank, Qty. 5 127 Scott Air-Pak Oxygen Tank 2216 PSI Qty. 10 128 Scott Air-Pak Oxygen Tank 2216 PSI Qty. 25 129 MSA Altair 4x Walkie Talkies, Qty. Approx. 59 130 MSA Altair 4x Walkie Talkies, Qty. Approx. 63 131 MSA Altair 4x Walkie Talkies, Qty. Approx. 60 132 MSA Altair 4x Walkie Talkies, Qty. Approx. 27 133 MSA Altair Multi-Unit Charging Stations, Qty. 6 134 MSA Altair Multi-Unit Charging Stations, Qty. 5 135 MSA Galaxy GX2 Multi-Unit Charging Station, Qty. 4 136 MSA Galaxy GX2 Multi-Unit Charging Station, Qty. 3 137 MSA Galaxy GX2 Multi-Unit Charging Station, Qty. 3 138 MSA Galaxy Altair 5 W/ Integral Pump Automated Test System. Qty. 3 139 MSA Galaxy Altair 5 W/ Integral Pump Automated Test System. Qty. 3 140 MSA Galaxy Altair 5 W/ Integral Pump Automated Test System. Qty. 3 141 MSA Galaxy Altair 5 W/ Integral Pump Automated Test System. Qty. 11 142 MSA Atmosphere Testing Monitor (No battery Included) Qty. Approx. 30 143 MSA Atmosphere Testing Monitor (No battery Included) Qty. Approx. 40 144 RAE Gas Detection Tubes and MSA Gas Miser Demand Regulators 145 Industrial Scientific MX4 Iquads, Qty. 10 146 DuPont Tychem Responder Hazmat Suit, Qty. 3 147 Salisbury Personal Protective Suit, Qty. 5 148 DuPont Tychem Responder Hazmat Suit, Qty. 4 149 DuPont Tychem Responder Hazmat Suit, Qty. 3 150 Salisbury Personal Protective Suit, Qty. 5 152 Salisbury Personal Protective Suit, Qty. 5 153 Salisbury Pro-Wear Arc Flash Protection, Qty. 2 154 Personal Protective Suit, Qty. 2 155 Personal Protective Suit, Qty. 2 156 Rock-N-Rescue Safety Harness, Qty. 3 157 SKED Stretchers 158 Rock-N-Rescue Safety Harness, Qty. 4 162 Life Source Digital Blood Pressure Monitor, Model #UA-767 Plus 163 Rock-N-Rescue Safety Harness, Qty. 2 164 Ansul Wheeled Fire Extinguisher, Qty. 2 165 Ansul Wheeled Fire Extinguisher, Qty. 2 166 Ansul Wheeled Fire Extinguisher, Qty. 2 167 Ansul Wheeled Fire Extinguisher, Qty. 2 168 Ansul Wheeled Fire Extinguisher, Qty. 2 169 Ansul Wheeled Fire Extinguisher, Qty. 2 170 Nasco AcidBasic Protective Wear (comes in various sizes) 171 Nasco AcidBasic Protective Wear (comes in various sizes) 172 Protective Upper Body Hoods 173 Protective Upper Body Hoods 174 Salisbury and Ansel Gloves 175 Salisbury Protective Gloves 176 DrawString Bags 177 Honeywell UVEX Safety Goggles 178 Encon 160 Goggles 179 Personal Protective Face Mask, Qty. 19 180 Personal Protective Face Mask, Qty. 18 181 Personal Protective Face Mask, Qty. 14 182 Scott Safety Personal Protective Face Mask, Qty. 12 183 aaa 184 AD 185 Scott Permissable Chemical Cartridge Respirator, Qty. 18 186 3M Protective Helmets, Qty. 3 187 Box of 3M Versaflo Powered Air Purifying Respirators 188 3M Powered Air Purifying Respirator 189 3M Powered Air Purifying Respirator 190 3M Powered Air Purifying Respirator Helmet (Lot Just Includes Helmet) 191 3M Powered Air Purifying Respirator 192 3M Powered Air Purifying Respirator 193 AD 194 Fire Hose Nozzles, Qty. 6 195 Fire Hose Nozzles, Qty. 5 196 Fire Hose Nozzles, Qty. 4 197 Mix Valve, Qty. 4 198 Mix Valve, Qty. 4 199 Mix Valve, Qty. 5 200 Fire Hose Nozzles, Qty. 10 201 Akron Fire Hose Nozzles, Qty. 7 202 Akron Fire Hose Nozzles, Qty. 7 203 Akron Fire Hose Nozzles, Qty. 7 204 AD 205 French Creek Safety Harnesses 206 Ultra Safety Harnesses 207 Ultra Safety Harnesses, Qty.6 208 Ultra Safety Harnesses, Qty.5 209 Ultra Safety Harnesses, Qty.5 210 Miller Relief Step Safety Devices 211 Miller AD 212 Miller AD 213 Honeywell Safety Clamps, Model #8814-127 Qty. 4 AD 214 Miller Scorpion & Turbo Lite Personal Fall Limiter, Qty. 11 215 MSEC & Miller Mighty Lite Self Retracting Lifeline, Qty. 2 216 Self Retracting Lifelines, Qty. 2 217 Miller Turbo Lite Personal Fall Limiter, Qty. 12 218 Miller Turbo Lite Personal Fall Limiter, Qty. 20 219 Miller Scorpion Personal Fall Limiter Approx. 13 220 Miller Turbo T-Bak Personal Fall Limiter, Qty. 8 221 Personal Fall Limiters, Qty. 6 222 Miller Personal Fall Limiters, Qty. 35 223 Medtronic LifePak Defibrillator, Qty. 2 224 Phillips Heartstart Defibrillator, Qty. 2 225 Medtronic LifePak Defibrillator & Medtronic LifePak 500T AED Training System 226 LifePak CR+ Defibrillator from Medtronic, Qty. 2 229 Air Systems Carbon Monoxide Monitor, Model #BB100-CO, S/N #7037 230 Air Hoses For Personal Protective Gear, Qty. 4 231 Air Hoses For Personal Protective Gear, Qty. 4 232 Air Hoses For Personal Protective Gear, Qty. 4 233 Sliver Hazmat Personal Protective Suit, Complete Suit Qty. 2 234 Sliver Hazmat Personal Protective Suit, Complete Suit Qty. 2 235 Sliver Hazmat Personal Protective Suit, Complete Suit Qty. 2 236 Sliver Hazmat Personal Protective Suit, Complete Suit Qty. 2 237 Sliver Hazmat Personal Protective Suit, Complete Suit Qty. 2 238 Sliver Hazmat Personal Protective Suit, Complete Suit Qty. 2 239 Sliver Hazmat Personal Protective Suit, Complete Suit Qty. 2 240 Sliver Hazmat Personal Protective Suit, Complete Suit Qty. 2 241 Hard Hats, Qty. 8 242 Hazmat Helmet Personal Protective Gear, Qty. 11 244 Hazmat Personal Protective Gloves 245 Personal Protective Helmets & Face Screens, Qty. 15 Helmets, 13 Screens 247 3M Powered Air Purifying Respirator 249 Scott NIOSH Approved Insert 250 MCS Master Diesel Fire Pump Controller, Model #DCFRA-3X, S/N #99880-2 251 Protective Hard Shell Cases, Qty. 7 253 Protective Hard Shell Cases, Qty. 4 254 Pelican Cases, Qty. 7 255 Ford F-350 XL Power Stroke Diesel Fire & Safety Pickup Truck, With Trailer Attachment & Fire Cannon 256 International Fire Truck 257 US National Fire & Safety Trailer 258 Fire & Safety Trailer 259 International Loadstar 1700 Fire Truck 260 Econol XL Ambulance 261 A Box 4U Blast Resistant Building 262 Bard Manufacturing Blast Resistant Building, S/N #315H133034936-02 263 Hunter Building Blast Resistant Building 264 A Box 4U Blast Resistant Building 265 MGS Inc Fire & Safety Trailer 266 Ford F-350 XL Power Stroke Diesel Fire & Safety Pickup Truck 267 Hunter Building Blast Resistant Building 277 Protective Safety Bunker (AD) 279 Fire Pumps & Controller 280 Fire Pumps & Controller 300 AD 301 Blower Fans, Qty. 6 (From Coppus & Allegro) 302 AD 303 Personal Protective Breathing Air Platforms 304 Personal Protective Breathing Air Platforms 305 Personal Protective Breathing Air Platforms 306 Personal Protective Breathing Air Platforms 307 Personal Protective Breathing Air Platforms 308 Personal Protective Breathing Air Platforms 309 Personal Protective Breathing Air Platforms 310 Personal Protective Breathing Air Platforms 311 Personal Protective Breathing Air Platforms 312 Personal Protective Breathing Air Platforms 313 Personal Protective Breathing Air Platforms
Click here for more information.

Online Only Auction - Surplus Equipment from Pipeline Foods

June 5, 2020, 3:22 am

≫ Next: AVAILABLE NOW - Surplus Equipment from the Ongoing Operations of MILLERCOORS

≪ Previous: Online Only Auction- Assets Formally of Fibrant - Plant Closure, Fire and Safety Equipment Auction

$

0

0

Online Only Auction - Surplus Equipment from Pipeline Foods Food Processing, Packaging and General Plant Support Equipment
	Online Bidding Only Begins: Thursday, July 09, 2020 at 10:00 AM CDT Location: Pipeline Foods, Malden, MO, US, 63863 FEATURES: Hutchinson Grain Pump, GSI Elevators, Insta-Pro Extruder and Replacement Parts, Insta-Pro Model 4500 Presses, CPM Counter Flow Cooler; Motorized Auger/Screw Conveyors, GSI Motorized Drag Conveyors, Sharples Decanter, KBH Poly Tanks & More!
Equipment Available for Purchase Prior to Auction by Piece or Bulk.  Click HERE for Equipmnet List, Photos & Internet Bidding Equipment List: Number Title 1 Brock Grain Tank, 42' Diameter x 8 Rings, Rated 36,000 Bushel Capacity w/Aeration and Power Sweep 2 Brock Hopper Bin, 21' Diameter x 5 Ring, Rated 5,000 Bushel Capacity w/Level Eye and Discharge 3 Tube Auger Conveyor, 35' Length x 8" Diameter, Approx. 5 HP Motor 4 Super B Energy Miser SQ-8 Series Dryer w/Quantum Monitor, Includes Brock Evenflo Dryer Unloading 5 Hutchinson Grain Pump w/33' Length x 6" Diameter, Double Rung Piping 6 Ferrell Ross Model 2HI Roller Mill, 10" x 30" Size, 25 HP Motor 7 Motorized Auger Conveyor, 12' Length x 9" Diameter, 3 HP Motor 8 Roskamp Champion Hammer Mill, 11 1/2 x 22 Size, 40 HP Motor 9 GSI Elevator, 24' Height, 9" x 5" Buckets 10 GSI Elevator, 43' Height, 9" x 5" Buckets 11 GSI Elevator, 24' Height, 9" x 5" Buckets 12 GSI Elevator, 24' Height, 9" x 5" Buckets 13 Kice Model #6E-18 Aspirator 14 Kice Model #FC-11 Fan 15 Kice Model #CK-36 Cyclone w/Rotary Valve 16 Insta-Pro Model #9400 Extruder, Rated 3 Tons/HR Soybeans, 350 HP Motor, Includes Hopper, Toshiba 17 Insta-Pro Replacement Parts - Screws, Spacers, Assorted 18 Insta-Pro Model #9000 Extruder, Rated 4 Ton Soybeans/Hour, 500 HP Motor, Includes Hopper, Soft and Insta-Pro Replacement Parts - Assorted For Insta-Pro 4-Ton Extruder     20 Insta-Pro Model 4500 Press, Includes Feeder and Crammer, 50 HP Motor 21 Insta-Pro Model 4500 Press, Includes Feeder and Crammer, 50 HP Motor 22 Insta-Pro Model #4500 Press-Disassembled, Includes New Feeder, Note - Needs Motor 23 CPM Model #CC1919 Counter Flow Cooler, Includes Controls 24 IAP Cooler Fan, Model #ORB20, Approx. 5 HP Motor 25 Schenck Process Model #1HE24 Collector w/Rotary Air Lock 25A (Located in Hope) Wal-Dor Vers-a-Belt Multi-Purpose Dryer Model 16-36 S/N 147-02 460 Volts, 3 Phase, 25B (Located in Hope) Trinity Industries Horizontal Propane Tank Model PXR S/N 364433, Water Gallons 180 26 Motorized Auger/Screw Conveyor, 36' x 12" Diameter 27 Motorized Auger/Screw Conveyor, 30' x 12" Diameter, Includes VFD 28 Motorized Auger/Screw Conveyor, 36' x 12" Diameter 29 Motorized Auger/Screw Conveyor, 24' x 12" Diameter 30 Motorized Auger/Screw Conveyor, 30' x 12" Diameter 31 Motorized Auger/Screw Conveyor, 12' x 12" Diameter 32 Motorized Auger/Screw Conveyor, 20' x 9" Diameter 33 Motorized Auger/Screw Conveyor, 36' x 12" Diameter 34 GSI Motorized Drag Conveyor, 120' Length x 10" Wide 35 GSI Motorized Drag Conveyor, 80' Length x 12" Wide, Includes 3 Hoppers 36 Mayrath Mobil Motorized 30' x 10"" Wide Belt Conveyor 37 Sharples Model P-3000 Decanter, Includes Platform, (2) Motors - 7 1/2 HP Motor, 20 HP Motor and 38 Yamada #NDP50-BAS Pneumatic Diaphragm Pump 39 Yamada #NDP50-BAS Pneumatic Diaphragm Pump 40 Graco Model Husky 2150 Pneumatic Diaphragm Pump 41 Viking Model HL4124B Positive Displacement Pump 42 Viking Model #LS4124A-02 Positive Displacement Pump, 20 HP Motor 43 Griswold Model #A70811M Size 4x3x8 Pump 44 KBH Poly Tank\ID#1, Rated 6300 Gal. Capacity 45 KBH Poly Tank\ID#2, Rated 6300 Gal. Capacity 46 KBH Poly Tank\ID#3, Rated 6300 Gal. Capacity 47 KBH Poly Tank\ID#4, Rated 6300 Gal. Capacity 48 KBH Poly Tank\ID#5, Rated 6300 Gal. Capacity 49 KBH Poly Tank\ID#6, Rated 6300 Gal. Capacity 50 KBH Poly Tank\ID#7, Rated 6300 Gal. Capacity 51 KBH Poly Tank\ID#8, Rated 6300 Gal. Capacity 52 KBH Poly Tank\ID#9, Rated 6300 Gal. Capacity 53 KBH Poly Tank\ID#10, Rated 6300 Gal. Capacity 54 KBH Poly Tank\ID#11, Rated 6300 Gal. Capacity 55 KBH Poly Tank\ID#12, Rated 6300 Gal. Capacity 56 Tube City Axial Fan Model #TCTA/2HP Motor, Includes VFD, Ductwork & Hoods 57 Bunting 12"" x 8"" Plate Magnet 58 Sullivan Palatek Model 25D-4 Air Compressor, 8796 Hours Indicated, 25 HP Motor 59 Sullivan Palatek Model 25D-4 Air Compressor, 13,496 Hours Indicated, 25 HP Motor 60 Sullivan Model Palatek Model SPRF115A-116 Refrigerated Air Dryer 61 Air Receptacle, 36" Diameter x 8' Ht. 62 Industrial Air Portable Air Compressor w/Honda Gx160 Gasoline Engine 63 Express Scale Model #GB-32 Scale, Ratio 5-1/Capacity 115 lbs., Manual Bagger, Includes Sewer 64 C.E.I. Pacer Horizontal Drum Feed Mixer, 15 HP Motor 65 Steel Hopper, Approx. 72" x 72" x 96" Deep 66 Ferrell Ross Model 100 Drop Through Sentry, Hammer Mill, 20 HP Motor, SN 62160117, Note - Never 67 Insta-Pro Model #850 Screening Tank 68 Hayes & Stolz Model #L56-12/8' Length, Motorized Paddle Auger, 15 HP Motor 69 Screw Conveyor Components 70 GSI Elevator Components - Assorted 71 Chicago Size 13 Blower, Approx. 15 HP Motor 72 Suction Hose - 3"/2" Diameter Assorted, Various Length, Total Length Approx. 100' 73 Gravity Flow Wagon, Approx. 150 Bushel Capacity 74 Gravity Flow Wagon, Approx. 150 Bushel Capacity 75 Gravity Flow Wagon, Approx. 150 Bushel Capacity 76 USC Model #TS25x25 Portable Pleated Belt Conveyor, 5 HP Motor 77 Gravity Flow Wagon, Approx. 150 Bushel Capacity 78 John Deere Model #4840 Tractor, 6244 Hrs. Indicated, Enclosed Cab 79 Westfield Model #MK 130-91 Plus Portable Screw Conveyor, 91' Length x 13" Diameter, SN 194414 80 Westfield Model #MKX 160-85 Portable Screw Conveyor, 85' Length x 16" Diameter 81 Avery Weightronix Truck Scale, Model #BMS-7011-100TJ75 w/GSE 560 Controls and Jobcom Intercom 82 Automation Direct Touch Screen, Electrical Control 83 Electrical Control Panel
Click here for more information.

---

AVAILABLE NOW - Surplus Equipment from the Ongoing Operations of MILLERCOORS

June 11, 2020, 10:12 am

≫ Next: Negotiated Sale: Available Immediately

≪ Previous: Online Only Auction - Surplus Equipment from Pipeline Foods

$

0

0

AVAILABLE NOW - Surplus Equipment from the Ongoing Operations of MILLERCOORS BREWERY EQUIPMENT
	Override: Sort by this Date/Time Begins: Friday, November 01, 2030 at 12:16 PM CDT Location: Assets located in USA & CANADA, , ON, CA,
*WELCOME TO THE ORDERLY NEGOTIATIED SALE PAGE* About the Sale: On behalf of the on-going & continuing operations of  MILLERCOORS USA LOCATIONS, Schneider Industries, Inc. is holding an ONGOING ORDERLY NEGOTIATED SALE of the items listed in Catalog below. Items are offered for sale on a First Come, First Serve Basis.   Sale Type: NEGOTIATED SALE. PLEASE CALL SCHNEIDER INDUSTRIES @ 314-863-7711 to discuss immediate PRICING AND AVAILABILITY.
Click here for more information.

Negotiated Sale: Available Immediately

June 11, 2020, 10:12 am

≫ Next: AVAILABLE NOW- Surplus Equipment to the Ongoing Operations of A Major International Beverage Corporation

≪ Previous: AVAILABLE NOW - Surplus Equipment from the Ongoing Operations of MILLERCOORS

$

0

0

Negotiated Sale: Available Immediately Weissbach Candle Manufacturing and Plant Support Equipment
	Override: Sort by this Date/Time Begins: Friday, June 22, 2029 at 11:00 AM CDT Location: 121 Hunter Ave, Saint Louis, MO, US, 63124 Surplus Assets to the Ongoing Operations of a Major Candle Manufacturer. Please contact Josh at joshs@schneiderind.com for pricing or more information.
Available Immediately! Contact Josh at joshs@schneiderind.com for more information. 1) Weissbach Pillar Extruding Line 2) Weissbach Votive Press 3) Weissbach Taper Extruding Line, 16 Up Over Dipper 4) Weissbach Powder Production Drum, 800 Kg/h (Qty 10) 5) Weissbach Continuous Drawing Machine 6) GE Transformer, SN P104153-DS00778001 7) Fork Truck Battery Charging Station 8) Hyster E50XL-33 Electric Forklift, SN C100VI050SK  9) Overhead Crane, 4000LB Capacity 10) Bale Breaker 11) Marley Cooling Tower, Model NC7221GS, SN 117808-001-97 12) Paper Shredder  13) Steelcraft Dust Collector 14) United Technologies Carrier Centrifugal Water Chiller, Model 19DK71313CM, SN 41681 15) Kewanee Boiler, Model HM884, SN 19564 16) Ajax Boiler, Model WRFC-3770, SN 64854 17) Carrier Evergreen Chiller, Model 23XR5050NTRRCC5, SN 69630
Click here for more information.

AVAILABLE NOW- Surplus Equipment to the Ongoing Operations of A Major International Beverage Corporation

June 12, 2020, 9:26 am

≫ Next: AVAILABLE NOW - Surplus Equipment from the Ongoing Operations of MOLSONCOORS

≪ Previous: Negotiated Sale: Available Immediately

$

0

0

AVAILABLE NOW- Surplus Equipment to the Ongoing Operations of A Major International Beverage Corporation BEVERAGE PROCESSING EQUIPMENT
	Override: Sort by this Date/Time Begins: Sunday, November 03, 2030 at 12:18 PM CST Location: Worldwide, , MO, US, Listed here is surplus used pre-owned Food Beverage Packaging Related Equipment for sale from a Major International Corporation. Check back often as items change.  Please contact joshb@schneiderind.com for additional information.
Listed Below is: Surplus Equipment from the On-going Operations of Major International Beverage Company   *Click on the Item to see available pictures.  *Spec Sheets available on some items. *Please call Schneider Industries at 314 863 7711 for current pricing.  NO INVENTORY AT THIS TIME.
Click here for more information.

AVAILABLE NOW - Surplus Equipment from the Ongoing Operations of MOLSONCOORS

June 12, 2020, 9:26 am

≫ Next: Online Only Auction - Surplus Assets to a Major Food Equipment Supplier - MTL Services, LLC

≪ Previous: AVAILABLE NOW- Surplus Equipment to the Ongoing Operations of A Major International Beverage Corporation

$

0

0

AVAILABLE NOW - Surplus Equipment from the Ongoing Operations of MOLSONCOORS BREWERY EQUIPMENT
	Override: Sort by this Date/Time Begins: Saturday, November 02, 2030 at 12:17 PM CDT Location: Assets located in USA & CANADA, , ON, CA, Asset Sale:
About the Negotiated Sale: On Behalf of the Continuing Operations of MolsonCoors located in Toronto Canada, Schneider Industries Inc will conduct a Negotiated Sale for Beer and Brewery Assets & Equipment.   Sale Type: Negotiated Sale.  Call 314-863-7711 for Pricing and Availability.  First Come, First Served,  Available Immediately.     ORDERLY   NEGOTIATED SALE ITEMS Description Call 314-863-7711 for Pricing. AVAILABLE NOW!
Click here for more information.

Online Only Auction - Surplus Assets to a Major Food Equipment Supplier - MTL Services, LLC

June 15, 2020, 10:18 am

≫ Next: Online Only Auction - Assets Formerly of WestRock Paper Mill

≪ Previous: AVAILABLE NOW - Surplus Equipment from the Ongoing Operations of MOLSONCOORS

$

0

0

Online Only Auction - Surplus Assets to a Major Food Equipment Supplier - MTL Services, LLC Food and Beverage Manufacturing Assets
	Online Bidding Only Begins: Thursday, July 16, 2020 at 10:00 AM CDT Location: 121 Hunter Ave, Saint Louis, MO, US, 63124 Items Located in Multiple Locations; Cartersville, GA; Gainesville, GA; Springdale, AR; Siloam Springs, AR; Pendegrass, GA; Enterprise, AL Features: Stein Ovens Stein Fryers Ohlson Rotary Scale Ishida Scales Heat & Control Fastbacks  Much More!!
Contact Josh S at joshs@schneiderind.com with all Inquiries.  Number Description 1 Inline Conveyor 42'' wide x 57" long, hydralics- removed from production; Part of complete 180 convey system; 42''x57'', Located in: Cartersville, GA 2 Ohlson Automatic Form Fill & Seal Machine, VFFX Series, Item# bbncohlsonBagvffx, Located in: Cartersville, GA 3 Marel Portioner, Serial# AO27342, Type: IPM3-600, Item# hormarelp7342, Located in: Cartersville, GA 4 Formax 19 Forming Machine, Model# F-19 PLC, Serial# 485, Item# MTLformax485, Located in: Cartersville, GA 5 Formax 19 Forming Machine, Model# F-19 PLC, Serial# 529, Item# MTLformax529, Located in: Cartersville, GA 6 Key Shaker, Serial# 1790, 36'' x 8' ; electric with hyralic lift, Item# FFKeyShaker1790, Located in: Cartersville, GA 7 Marel Splitter, Model# 200, Item# hormarelspl-1, Located in: Cartersville, GA 8 Key Shaker w/ Components, Item# Ffkeyshaker-1, Located in: Cartersville, GA 9 Marel Vision Unit - 300, Serial# A036242, 33'' x 60'', Item# ffmarelvison6242, Located in: Cartersville, GA 10 FPEC Vacuum Metering System, Model# VMS, Serial# 8740, Item# MTLFPECVMS8740, Located in: Cartersville, GA 11 Key Shaker, Serial# 0313, 34'' x 5'5'', Item# ffkeyshaker0313, Located in: Cartersville, GA 12 3000 lb Hopper, 60" Diameter x 70" Tall, Item# mtl3000hopper-1, Located in: Cartersville, GA 13 Evapco Evaporator, Model# NTMZ-3564-200I, Serial# 996493M, Item# mtlevapco493m, Located in: Cartersville, GA 14 Mclean X-Ray Machine, Model# CR29-0426-G054, Serial# 09000945-1, 2''3/4 diam, Item# ffmclxray9451, Located in: Cartersville, GA 15 Stein 34'' breader, Item# ffstebre34-3, Located in: Cartersville, GA 16 Ohlson Rotary Combination Weigh Scale - 14 Head, Model# 142B03XM, Serial# 881400, Item# bbncohlsca1400, Located in: Cartersville, GA 17 Ishida Scale, Serial# 47822, Item# bbncishsca7822, Located in: Cartersville, GA 18 Key Shaker, 33" wide x 78" long, Serial# 0313, Item# ffkeyshaker-3, Located in: Cartersville, GA 19 Kofab Scale Infeed Conveyor, 12" wide x 144" long, Serial# 100000000141, Item# mtlkofsic0141, Located in: Cartersville, GA 20 Frozen Block Conveyor, 34" wide x 140" long, Item# bbwifrblcon-1, Located in: Cartersville, GA 21 FPEC Mega Press, Model# SCP123, 34'' wide, Hydraulic, Item# bbwifpecmegp-1, Located in: Cartersville, GA 22 PES QC Simple Vision, Item# ffpesqcsim-1, Located in: Cartersville, GA 23 Marel TSM Profiler Slicer, Model# TSM2-C165, Serial# A049237, Item# ffmartsm9237, Located in: Cartersville, GA 24 Marel TSM Profiler Slicer, Model# TSM2-C165, Serial# A05149J, Item# ffmartsm149j, Located in: Cartersville, GA 25 Stein Thermal Fin Fryer, Model# TFF-IV-3428, Serial# 140, 34" wide x 28' long, Item# mtlstetff140, over $100,000 new components; have insulated hoods, Located in: Cartersville, GA 26 Stein Thermal Fin Fryer, Model# TFFII-3419, Serial# 341, Item# ffstetff341, 34" wide x 19' long, with holddown belt ; have insulated hoods, Located in: Cartersville, GA 27 Dual Mixing Tank, 40" Diameter x 46" tall, Item# mtldualmixtk-1, Located in: Cartersville, GA 28 Stein MFS 30 Oil Filter, Item# mtlstmsf30fil-1, Located in: Cartersville, GA 29 Conveyor System, 76" long x 12" wide, Electric Drive, Item# ffconvesys-1, Located in: Cartersville, GA 30 Safeline Metal Detector, Aperture: 5" x 44", Serial# 83252, Item# mtlsafemetdet3252, Located in: Cartersville, GA 31 Cambridge E2 Double Reinforced SS Belt, 46" wide x 50' long, New Belt, 7 Rolls, Item# ffcame2ssbelt, Located in: Cartersville, GA 32 Conveyor System, 76" long x 12" wide, Model# SS-HMQ-821-40-H1-56-20, Item# ffconvesys-2, Located in: Cartersville, GA 33 Omar Associates Char Maker, 24" wide, Item# bbncomarchmk-1, Located in: Cartersville, GA 34 CFS Belt Grill, 24" wide x 235" long, Model# TWG6000/650, Serial# 644, Item# bbnccfsbeltgr644, Located in: Cartersville, GA 35 FPEC CO2 Bottom Injection Mixture/ Blender, Model# 814, Serial# 9119, Item# bbncfpeccbim9119, Located in: Cartersville, GA 36 Elbe Automatic AB Belt Grill Thermal Fluid, 40" wide x 15'9" long, Serial# 230415, Item# bbncelbebeltgr0415, Located in: Cartersville, GA 37 Formax 19 Hopper, Item# mtlformaxhopex, Located in: Cartersville, GA 38 FPEC Vacuum Metering System, 28" long, Roller Missing, Model# VMS, Serial# 7616, Item# bbncfpecvms7616, Located in: Cartersville, GA 39 42" 180 Conveyor System, Item# mtl42180consys-1, Located in: Cartersville, GA 40 42" 180 Conveyor System, Item# mtl42180consys-2, Located in: Cartersville, GA 41 Frick Rotary Screw Compressor, Model# TDSH233S, Serial# 2832E, 400HP, 8/1/2011 REBUILT STELLAR, Item# FFFRIRSCOM832E, Located in: Cartersville, GA 42 Mycom Screw Compressor, Model# 250VSD, 350 HP, Serial# 2556290, Item# ffmycscom6290, Located in: Cartersville, GA 43 34" 90 Conveyor System, Item# mtl3490consys-2, Located in: Cartersville, GA 44 Flex-Turn Conveyor, 34" 90 Conveyor System (Straight conveyor included if wanted), Model# 316-34L90-059, Serial# 316-34-0026, Item# mtl3490consys-3, Located in: Cartersville, GA 45 Flex-Turn Conveyor, 42" 90 Conveyor System, Model# 316-42L90-059, Serial# 316-420019, Item# mtl4390consys0019-4, Located in: Cartersville, GA 46 42" 90 Conveyor System, Item# mtl4290consys-5, Located in: Cartersville, GA 47 Scanvaegt Weighing Machine, Model# 4717.275.30, Serial# b0e00308, Item# ffscvtwmac0308, Located in: Cartersville, GA 48 Stein SF 11 Oil Filter, Item# bbncstesf11of, Located in: Cartersville, GA 49 Drum Breader 4, Item# ffdb4-2, Located in: Cartersville, GA 50 NEW JBT Spiral Belting, M13 Mesh, Model# GCM76-08, 50 Feet Long, Item# mtljbtspbelt50, Located in: Cartersville, GA 51 NEW JBT Spiral Belting, M9 Mesh, Model# GCM76-08, 25 Feet Long, Item# mtljbtspbelt25, Located in: Cartersville, GA 52 NEW JBT Spiral Belting, M13 Mesh, Model# GCM76-08, 20 Feet Long, Item# mtljbtspbelt20, Located in: Cartersville, GA 53 Frigodrive Ball Chain Ins, Model# 2592-0083, 1 yard long (8 total), Located in: Cartersville, GA 54 Lenze Motor, Model# mderaxx071-325, Serial# 10110202, Item# mtllenze10202, Located in: Cartersville, GA 55 Lenze Motor, Model# mderaxx071-32j, Serial# 10091536, Item# mtllenze1536, Located in: Cartersville, GA 56 Lenze Motor, Model# mderaxx071-32j, Serial# 10061486, Item# mtllenze1486, Located in: Cartersville, GA 57 Lenze Motor, Model# mderaxx071-32j, Serial# 10110228, Item# mtllenze0228, Located in: Cartersville, GA 58 Bosch Motor, Model# 513300212, Serial# 79162111, Item# mtlbosch2111, Located in: Cartersville, GA 59 Contintental Hyrdraulics Directional Valve, Model# vm12m-4f-g-10-a, Item# mtlconhydvg10a, Located in: Cartersville, GA 60 Allen-Bradley Start Stop Assembly, 4 total, Located in: Cartersville, GA 61 Stepbord Step Motor, Model# sd8l852-200-79-n1350, Item# mtlstebon1350, Located in: Cartersville, GA 62 Eclipse Vari-Set Mixer- Gas Selector Part, Quantity 7 total, Located in: Cartersville, GA 63 Eclipse Vari-Set Mixer- Gas Selector Part, Located in: Cartersville, GA 64 Ecipse Automatic Gas Shutoff Valve, Series 2000AT Valve, Located in: Cartersville, GA 65 Eclipse Manual Reset Shutoff Valve, Model# 204lt-af-3, Serial# 69940, Quantity 2 Total, Located in: Cartersville, GA 66 Eclipse Autotite Automatic Gas Shutoff, Model# 2004AT, Serial# 11643, Located in: Cartersville, GA 67 Baldor Washdown Duty Motor, Model# vsswdm3613t, Located in: Cartersville, GA 68 FPEC Hopper, Model# VFH 86, Serial# 6018, Located in: Springdale, AR 69 CAT Hopper, Located in: Springdale, AR 70 Stein XL 34, Located in: Springdale, AR 71 FPEC Hopper, Model# VFH 86, Serial# 8651, Located in: Springdale, AR 72 FPEC Hopper, Model# VFH 86, Serial# 8587, Located in: Springdale, AR 73 CAT VMS, Serial# 139, Located in: Springdale, AR 74 FPEC Hopper, Located in: Springdale, AR 75 Safeline PipeChek + Xray Detection, Serial# X8803801, Located in: Springdale, AR 76 FPEC Hopper 3, Model# VFH 86, Serial# 9152, Located in: Springdale, AR 77 Baader Johnson, Model# BA-1900, Serial# 227814/37-19042, Located in: Springdale, AR 78 Phantom Metal Detector w/ Conveyor, Located in: Springdale, AR 79 Heat and Control FastBack, Model# CV-FB-260E, Serial# 5009, Located in: Springdale, AR 80 Heat and Control FastBack, Model# CV-FB-260E, Serial# 5007, Located in: Springdale, AR 81 Marel Platino PLT-800, Model# PLT-P002-800, Serial# EO17445, Located in: Springdale, AR 82 Heat and Control FastBack, Model# CV-FB-260E, Serial# 5008, Located in: Springdale, AR 83 Shaker Beds for FastBacks, Located in: Springdale, AR 84 Evapco Evaporator, Model# SSTW3-00758-2, Serial# 10-386490, Located in: Springdale, AR 85 FoodMate Opti Drum Deboner, Serial# FM.00.693.014, 6000 drums/hr capacity, Located in: Springdale, AR 86 FPEC Combo Dumper, Located in: Siloam Springs, AR 87 Marel Dynamic Weighing Unit, Model# DWU, Serial# A124849, Year 2015, Located in: Siloam Springs, AR 88 Marel Dynamic Weighing Unit, Model# DWU, Serial# A124850, Year 2015, Located in: Siloam Springs, AR 89 FPEC Vacuum Tumbler, Model# VT85, Serial# 7598, Located in: Siloam Springs, AR 90 Northfield Super Contact Crust Freezer, Model# 3620, Located in: Siloam Springs, AR 91 Stein JSO Oven, Model# JSO-IV, Serial# 814, Located in: Siloam Springs, AR 92 FPEC Hopper, Model# VFH 864042, Serial# 4042, Located in: Siloam Springs, AR 93 MP Equipment Drum Breader, Located in: Siloam Springs, AR 94 Stein 34'' XL Breader, Model# XL-34-FH, Serial# 548, Located in: Siloam Springs, AR 95 Ishida Scale, Serial# 54446, Located in: Siloam Springs, AR 96 Don's Hydraulics Hydraulic Powerpak, Located in: Gainesville, GA 97 Fulton Thermal Boiler, Thermal Oil, Model# ST-1260-F, Serial# 3671C, Year 2005, Located in: Gainesville, GA 98 Fulton Thermal Boiler, Thermal Oil, Model# ST-1260-F, Serial# 3672C, Year 2005, Located in: Gainesville, GA 99 THS300 Breader, Model# THS-300, Located in: Gainesville, GA 100 Tuck and Tie Cine Line, Serial# 6163 382-00, Year 2017, Located in: Virginia 101 624 DSI, Year 2010, Located in: Virginia 102 I-Cut Breast, Year 2015, Located in: Virginia 103 I-Cut Nugget, Year 2015, Located in: Virginia 104 Marination Mixing Tanks, Serial #22185-2 & 22185-8, Year 2016, Located in: Virginia 105 Sensor X Extension,Model# xgr-m520-090012,  Searial# A117220, Year 2014, Located in: Virginia 106 JBT Slicer DLSH 6048, Model# DLSH, Serial# 6048, Year 2014, Located in: Virginia 107 I-Cut Splitters 1, Year 2015, Located in: Virginia 108 I-Cut Splitters 2, Year 2015, Located in: Virginia 109 Marel DL300, Year 2015, Located in: Virginia 110 Conveyor 9'5''X31''  -1, Year 2015, Located in: Virginia 111 Conveyor 9'5''X31''  -2, Year 2015, Located in: Virginia 112 Conveyor 11'3''X31'' -1, Year 2015, Located in: Virginia 113 JBT Slicer DLSH 6044, Year 2012, Located in: Virginia 114 Conveyor -1, Year 2015, Located in: Virginia 115 Cooling Bank, Year 2016, Located in: Virginia
Click here for more information.

Online Only Auction - Assets Formerly of WestRock Paper Mill

June 18, 2020, 6:00 am

≫ Next: AVAILABLE NOW- Surplus Equipment to the Ongoing Operations of A Major International Beverage Corporation

≪ Previous: Online Only Auction - Surplus Assets to a Major Food Equipment Supplier - MTL Services, LLC

$

0

0

Online Only Auction - Assets Formerly of WestRock Paper Mill Paper Mill Equipment Including Dryers, Presses, Stock Cleaners, Pumps & More!
	Online Bidding Only Begins: Tuesday, July 07, 2020 at 10:00 AM CDT Location: 72 Dock Rd, Montville, CT, US, 06382 Features: Pope Reels, Winders, Stock Cleaner Celleco Hedemora, Transphase Steam Box, Nacan Starch Cooker System, Lathes, Grinders, Press Rolls, Skiver Winders, Swing Arm Beam Cranes, Steam Turbine Generator, Tool Crib & More!
Auction information to be added shortly, including asset list and removal information.  For questions about this upcoming auction please email Riley M at rileym@schneiderind.com
Click here for more information.

AVAILABLE NOW- Surplus Equipment to the Ongoing Operations of A Major International Beverage Corporation

June 19, 2020, 10:51 am

≫ Next: Online Only Auction - Surplus Assets of Ava Industries

≪ Previous: Online Only Auction - Assets Formerly of WestRock Paper Mill

$

0

0

AVAILABLE NOW- Surplus Equipment to the Ongoing Operations of A Major International Beverage Corporation BEVERAGE PROCESSING EQUIPMENT
	Override: Sort by this Date/Time Begins: Sunday, November 03, 2030 at 12:18 PM CST Location: Worldwide, , MO, US, Listed here is surplus used pre-owned Food Beverage Packaging Related Equipment for sale from a Major International Corporation. Check back often as items change.  Please contact joshb@schneiderind.com for additional information.
Listed Below is: Surplus Equipment from the On-going Operations of Major International Beverage Company   *Click on the Item to see available pictures.  *Spec Sheets available on some items. *Please call Schneider Industries at 314 863 7711 for current pricing.  NO INVENTORY AT THIS TIME.
Click here for more information.

---

Online Only Auction - Surplus Assets of Ava Industries

June 29, 2020, 3:15 am

≫ Next: Online Only Auction - Boeing Surplus Assets

≪ Previous: AVAILABLE NOW- Surplus Equipment to the Ongoing Operations of A Major International Beverage Corporation

$

0

0

Online Only Auction - Surplus Assets of Ava Industries Textile Manufacturing and Support Equipmen
	Online Bidding Only Begins: Monday, July 13, 2020 at 10:00 AM CDT Location: 1960 Langston St, Rock Hill, SC, US, 29730 Features: Washers, Dryers, Dyes, Compressors, Dyeing Machines, and Much More!!
Contact Josh S at joshs@schneiderind.com with any questions. Lot No Description 1Y Mahlo System straitening MachineModel No:  RFMC-94H,  Working Width 104 7/8", Rigging Fee $100 3D Pallet Jack, No ID Tag, Rigging Fee For This Item Is $25 9 Mahlo System: Model RFMC 94H, 480/3AC, Working Width 73 1/4", Rigging Fee $50 10 Multi Shifter Machine, 6 ft x 4 ft x 6 ft, Model #BTC-22A, SN 209, Max Cap 2500 lbs Rigging Fee For This Item Is $25 15 Custom Rollup (2) 6in  Diameter Rolls. With the inspection 80” Wide.  Includes DC Control. 220 Volts, Rigging Fee: $50 16A Yale Electric Pallet Jack, Model #MCW040LN24CS072, 510 Amps, 24 Volts, 3 ft. Forks, Serial #N539212 Rigging Fee For This Item Is $25 18 Crown Electric Pallet Jack, Model #60PE-27-3, 600 Amps, 24 Volts, 4 ft. Forks, Serial #W91738, Rigging Fee For This Item Is $25 21 Crompton & Knowles 2 Roll Pad Machine, MFG # 76, serial # 6290, Model: 10TCP134, Length: 132" Steel to Rubber, Dip Tank, Good Condition, Rigging Fee $250 22 PAD. 158” Wide X 16” Diameter Rubber to Rubber  Pneumatic pressure’s, Rigging Fee: $250 23 Morrison Pad Finishing Machine, Serial # 100, Length: 75", 3 Roll, rubber on steel and steel on rubber, steel heated roll, no motor, Rigging Fee $150 24 Murata Machinery Winding Machine, Model# 7R2, Serial# 89SX469040-01, 380V, 50 Hz, Working Width 126", Steel to steel, Dip Tank, 1750 RPM, 88.4 Amp, 25 Hp, 240 Volts,  Good Condition, Rigging Fee $250 24Y PAD  126” X 14” Diameter Rubbers to still  pneumatic press. DC motor 25Hp 220 volts, , Rigging Fee: $250 25 Kuester Pad. Working Width: 87", Steel to rubber, pressurized rubber roll, hydraulic.  Good Condition, Rigging Fee $250 30A Red Pallet Jack, Rigging Fee For This Item Is $25 33A Kusters’s Padder Type 222 works 70”, Rigging Fee: $250 37 Kranz Single A Frame Winder, Controls included, 60 hz, 1755 rpm, 460 volts, Good Condition, Rigging Fee $50 38 Kranz Single A frame winder, Model: 684, Ser # 12090, 60 hz, 1755 rpm, 460 volts, Control Included, Rigging Fee $50 39 Kranz A frame winder, Model: 604, Never Used, Excellent Condtion, Ser # 12076/2, Rigging Fee $50 40 Ladis Coater Machine: 1 trouff, Working Width 78", trouff is 58", excellent condition, Rigging Fee $50 40A Hydraulic Plow (No Tag), Rigging Fee For This Item Is $25 43 M-TEC  D41751 Steam Finishing Machine.  94” Wide.  5HP. 220/460 Volts, Rigging Fee: $250 44 Stork screen washing, Working Width 67 3/4", Screen washer for Rotary screens, Good Condition, Clean, Rigging Fee $75 45 Inspection Machine, Working Width 150", Roll Up, Compensator, and Inspection, Rigging Fee $200 46 Latex Applicator, 3hp, 60 hz, 3.8amp, 460 volts, 1750 rpm, length: 106 1/2", Working Width 106 1/2", Good Condition, Rigging Fee $100 46B Fabric Inspection Machine w/ Take Off and Roll Up, Maximum Inspection Width 90 in., Eye Guiding System, 220 Volts, Good working condition , Rigging Fee $100 47 Parks Woolson  Shear 70” Wide. Serial 16649.    8” diameter revolver.  10 Hp 220/460 Volts, Rigging Fee: $ 250 48 Inspection Machine Table Work 84” Wide and Unwinder Conveyor Belt. For special fabric. PLC Device to Follow Speed. Tension Device. 220 Volts DC, Rigging Fee: $25 49 Mahlo Type Model MfRC 10A Serial 30 664 30091 Date 7-00   440 Volts AC, Rigging Fee: $50 50 Hytrol Conveyor Line: 5 sections, Lenghts for each section are: 131" , 136", 101", 119", and 137", Rigging Fee: $25 51 Hytrol Conveyor Line: 2 Sections, Lenghts are: 150" & 138", Overall Width: 30" , Belt Width: 24", Rigging Fee: $25 54 MS Machinery and Systems Washer and Squeezing Machine.  Model POLROT. Serial #  940080. Year 1995, Rigging Fee $250 55 Horizontal Tank steam Boiler. Condensate Return Systems Tank (For 2 pumps), Rigging Fee: $25 56A EVAC Vacuum Pump Sutorbilt Model 7ML-RHC Serial 330313 . 50HP 220/460 Volts 1750 Rpm, Rigging Fee: $50 59 Air Tank Nat BD 7930 Penway INC. MAWP  200 P.S.I  AT  350 . WC 400. MS # A7955 . SH 250 . HD 233, Rigging Fee: $50 60 Air Tank  NATL BD  481804 Brunner ENG MAWP -200 PSI At 450 W.C 400 MGG ser XX, Rigging Fee: $50 61 Unwind cradle with idlers rolls 124”long 18”diameter. Motorized and Air Aliment, Rigging Fee: $100 64 Vanwyk Mixer, Type: AL1122H2, 330 Volts, 7.5 HP, 40" Stainless Steel, Mixer Pole, Good Condition, Rigging Fee $50 65 Custom Made 68” Long Continuous Steamer. Four Pipes with Temperature Control, Rigging Fee: $100 66Y Vanwyk Mixer, Ser # 1662, 460 Volts, 25 Amps, Stainless Steel, Rigging Fee $50 67 EVAC Vacuum Slash 136”, Rigging Fee: $25 68 EVAC vacuum slash 80”, Rigging Fee: $25 69 EVAC Vacuum Slash 135”, Rigging Fee: $25 70 EVAC Vacuum Slash 84”, Rigging Fee: $25 70B Parks Woolson Shear 82” wide 8” diameter revolver. Serial 11961. 10HP 220/460 volts, Rigging Fee $250 71 Parks Woolson Shear 82” wide  S# 11962 10Hp  220/460 Volts, Rigging Fee: $250 72 Parks Woolson Shear 82” Wide S# 11969.  10HP 220/460 volts, Rigging Fee: $250 74 Gribetz Panel Cutter.  Serial 206 -0155  for Mattress Manufacturing and Quilting Machines.  90” wide, Rigging Fee: $250 75 Inspection Machine 72” Wide.  4.5 “ Diameter Rolls  12Hp 120 Volts, Rigging Fee: $100 76 Kranz Automatic Roll Up 154” Model 701MM. Serial S2000  5Hp 220460 Volts, Rigging Fee: $250 79 Bianco Fabric Opener, Serial # BX005762, 5 Pieces, 230 Volts, 80hz, Working Width: 94 1/4" Stainless Steel Good Condition, Rigging Fee $200 81 Silk City A frame Winder, Serial # 510120175, 180 Volts, 23 amps, Good Condition, Rigging Fee $35 82 Gaston County Sample Dye Machine: Serial # 1600496, 2 hp, 220 volts, 2.0 Amps, Rigging Fee $35 91 Byars Machine Co. Inspection Machine Knitted Rolls, Serial# 10190, Working Width 50", Rigging Fee For This Item Is $150 122Y AYTC Dyeing Machine, Includes Tank, Filter, Pump and Controls.  Very Clean and GOOD CONDITION, MODEL: BT 450, Made In: 1980, MOTOR: Volts: 230/460, RPM: 1755, AMPS: 50/25, HP: 20, Rigging Fee: $250 130 Lafer Sanding Machine, Model # GSM-90- Double Cylinder, Includes Flat Folder, Lint removal brushing system and Lint Suction Fans  included.  Good Condition, Rigging Fee $250 131B Fulton Steam Boiler Works Boiler, J5958, 480 Volts, 906 Amps, 750 kw, Built in 1979, 3 Phase, Rigging Fee $35 131C KONUS KESSEL. Boiler. Model MS -7VZD  Serial 224864. Year 1966. Mat # 221916. KV 0.525 Thermal fluid oil Boiler, Rigging Fee $250 132 Color Kitchen, 9 Pneumatic Pumps with 9 Filters, Rigging Fee $150 132A Color Kitchen, 8 Pneumatic Pumps with 8 Filters, Rigging Fee $150 135Y Pillow Case Folpen, CTI5250, Access Module, 230/480 volts, 4.75 AMPS, 1/2 HP, 1700 RPM, Includes Creal and control monitor.  Good Condition, Rigging Fee $100 200 Clark Equipment Forklift, Model: EC500-20D, 36 Volts, Max Cap. 1700, Fork Size 42", No Battery, Rigging Fee $40 204 Gaston County Dye Jet Control Panels - Qty. Two, Rigging Fee: $25 232 Gaston Systems Parabolic Coater (Large), Top Coating, 160 in. Working Width, 240/460 Volts, Stainless Construction, Excellent , Condition, SN 1200690B, Rigging Fee For This Item Is $150 233 Gaston Foamer Applicator. Manual Foamer. Pressurized, Rigging Fee: $100 236 Gaston County FOAMER Applicator serial # 98106 G. Paft 1590 C, Rigging Fee: $100 473 Land W Machine Works Sample Oven with Dip Pad Machine, 12 in. Roll Width, Rollers: Rubber on Rubber with Dip Tank and Oven, 220 Volts, Stainless Construction, Rigging Fee For This Item Is $30  492 Ingersoll Rand Air Compressor CENTAC Model OCV6M2. Serial M926448. CFM  625. PSIA 14,1. PSIG 125. Motor 460volts  200 HP 3580 Rpm, Rigging Fee: $250 493 Ingersollrand Air Compressor Centac Model OC6M2 serial M94-7749. CFM 600. PSIA 14,1. PSIG 125. Motor 175 HP. 3500 RPM 460 Volts. Panel Model OCV6M2, Rigging Fee: $250 501 Atlas Capco GA 200-125 Serial AIF017-798. PSIG 130. Hp 250. Volts 480, Rigging Fee: $250 673A SIEMENS Switchboard Cat SB1 Enclosure Type 1.  800Amps Mains 480277. Switchboard Type Cat SB1 S.O 18-68136 D00  010 System 480-277 Vols 800 Amps Mains (1 Switchboard, 2 Units), Rigging Fee: $100 673B SIEMENS Switchboard Cat SB1 Enclosure Type 1.  800 Amps Main 480277. Switchboard Type Cat SB1 S.O 18-68136 D00  010 System 480/277 Volts 800 Amps Main (2 units), Rigging Fee: $100 676 SAFTRONICS  Inverter 200Hp. Model RRAD1042000K5-P. Serial # 180742. Volts 460. (2 cooling units model IQ 800V16.  120volts), Rigging Fee: $50 694 Keltronix Chemical Mixing System w/ (6) Stainless Steel Tanks: Keltronix Stainless Steel Tank, 32 inches Diameter, 28 inches Height, Agitator/Mixer , Bottom Discharge; Keltronix Stainless Steel Tank, 32 inches Diameter, 28 inches Height, Agitator/Mixer, Bottom Discharge; Keltronix Stainless Steel Tank, 21 inches Diameter, 21 inches Height, Agitator/Mixer, Bottom Discharge; Keltronix Stainless Steel Tank, 21 inches Diameter, 21 inches Height, Agitator/Mixer, Bottom Discharge; Keltronix Stainless Steel Tank, 16 inches Diameter, 20.75 inches Height, Agitator/Mixer, Bottom Discharge; Keltronix Stainless Steel Tank, 16 inches Diameter, 20.75 inches Height, Agitator/Mixer, Bottom Discharge, Rigging Fee $75 695 Keltronix Chemical Mixing System w/ (6) Stainless Steel Tanks: Keltronix Stainless Steel Tank, 32 inches Diameter, 28 inches Height, Agitator/Mixer, Bottom Discharge; Keltronix Stainless Steel Tank, 32 inches Diameter, 28 inches Height, Agitator/Mixer, Bottom Discharge; Keltronix Stainless Steel Tank, 21 inches Diameter, 21 inches Height, Agitator/Mixer, Bottom Discharge; Keltronix Stainless Steel Tank, 21 inches Diameter, 21 inches Height, Agitator/Mixer, Bottom Discharge; Keltronix Stainless Steel Tank, 16 inches Diameter, 20.75 inches Height, Agitator/Mixer, Bottom Discharge; Keltronix Stainless Steel Tank, 16 inches Diameter, 20.75 inches Height, Agitator/Mixer, Bottom Discharge, Rigging Fee $75 698 Keltronix Chemical Mixing System w/ (6) Stainless Steel Tanks: Keltronix Stainless Steel Tank, 30 inches Diameter, 26.5 inches Height, Agitator/Mixer, Discharge Bottom; Keltronix Stainless Steel Tank, 30 inches Diameter, 26.5 inches Height, Agitator/Mixer, Discharge Bottom; Keltronix Stainless Steel Tank, 24.5 inches Diameter, 22.5 inches Height, Agitator/Mixer, Discharge Bottom; Keltronix Stainless Steel Tank, 24.5 inches Diameter, 22.5 inches Height, Agitator/Mixer, Discharge Bottom; Keltronix Stainless Steel Tank, 18 inches Diameter, 20.5 inches Height, Agitator/Mixer, Discharge Bottom; Keltronix Stainless Steel Tank, 18 inches Diameter, 20.5 inches Height, Agitator/Mixer, Discharge Bottom, Rigging Fee For This Item Is $75 1002 Weather Ometer, Model# 25W, Serial#WX-516, 208-250 Volts, 23 Amps, Single Phase, Rigging Fee $50 1006 Conveyor, 13 Inch Wide x 18 ft Long, 220 Volts, Rigging Fee For This Item Is $25 1068 Reggiani Fabric Printer, Model# 26342, Length 106.25", Width 106", 1 Color, w/ continuous Conveyor, Rigging Fee $150 4017 MATHIS ZELTEX TURBY  for Sample Dyeing  Model T6 35 serial T020.95.  220 Volts, Rigging Fee: $25 4018 Electronic Yarn Count Tester, Yard Length Measuring Machine Model ILE-5-SKRM-1M. 110 Volts AC, Rigging Fee: $25 4019 Vertical Flammability Tester. Model 7635-A Serial 10520 (2 Units), Rigging Fee: $25 4020 Plane Abrasion Tester Model Toyota-Type. Serial # H-7203, Rigging Fee: $25 4021 Precision Scientific Heating Cat. 65500 Serial 10Az-11.  120 Volts. 1800 Watts, Rigging Fee: $25 4022 Manual Yard Twist Tester Counter Fiber Machine  Model ILE  ITC 5H, Rigging Fee: $25 4023 AHIBA Canisters Mode A 9023 and Miscellaneous Parts, Rigging Fee: $25 4025 Turbidimeter Meter Model 8391-35 110 Volts, Rigging Fee: $25 4026 Gravimetric Absorbency Testing System. 120 Volts AC, Rigging Fee: $25 4027 Bell Howell Still Picture Projector  Model 3660R, Rigging Fee: $25 4028 Spectronic 20. Model. Cat # 33.3179 Serial 0214567A   110 Volts Ac, Rigging Fee: $25 4029 LAFER Spa.  Portable Sharpner for Raising Machines, Rigging Fee: $25 4030 Electric Flammability Tester.  Model 7633-E. Serial # 10343. 110 Volts, Rigging Fee: $25 4031 MDM in Tag Attaching Machine Model VNS with Guard. Serial J 11000137, Rigging Fee: $25 4032 RANDOM TUMBLE PILLING Tester Model T 4. Serial ET 24B1, Rigging Fee: $25 4033 KJELTEC  2300 Analyzer Unit Laboratory. Can Be Pre-Programmed. Distillation Recovery Test and Analysis. Colorimetric Titration System, Rigging Fee: $25 5001 Gessner Head Liner Napper, Model# 0801-2552, Serial# NU127, Working Lenth 9', Rigging Fee $250 5002 Gessner Squeezer Air Water Pressure, Working Length 14.5', Rigging Fee $250 5003 Gessner Squeezer Air Water Pressure, Working Length 14.5', Rigging Fee $250 5004 Gessner Squeezer Air Water Pressure, Working Length 14.5', Rigging Fee $250 5005 Gessner Squeezer Air Water Pressure, Working Length 14.5', Rigging Fee $250 5007 Parkinson Winder, Model# 93-0419, Working Length 80" , Rigging Fee $50 5008 G.A. Braun Inc. Washer, Model# 800 NEUT.TSL, Serial# NTDP80086352-DYE, Working Length 11', Rigging Fee $250 5009 John Verduin Dying Printing Finishing Machine, Model# Calender, Serial# 758A3696, Rigging Fee $250 5013 G.A. Braun, Inc. Dryer, Model# 81H-NGF, Serial# H8193145, Working Circumfrence 43.5", Depth 34", Rigging Fee $150 5014 Hyster Electric Forklift, Model# J30B, Serial# B16OVO203K, 36V, Rigging Fee $50 5015 Caterpillar Forklift, Model# T30D, Serial# 5651154, Rigging Fee $50 5018 Crown Upright Vertical Picker, Serial# 1A186376, 3,000 lbs Limit, Rigging Fee $150 5019 Clark Forklift, Model# EC500-80, Serial# E5685-0077-4751, 36V, Rigging Fee $50 5024 Crown Forklift, Serial# 1A188334, 24V, Rigging Fee $50 5026 Crown Forklift, Model# 30SP42TT-S, Serial# H14929, 24V, Rigging Fee $50 5028 Raymond Picker, Model# EAS1R3OTT, Serial# EZ-A-01-21535, 36V, Rigging Fee $50 5033 Hyster Picker, Model# E50XL-27, Serial# C108V19080P, 36V, Rigging Fee $50 5039 Pellerin Milnor Dry Cleaning Equipment, Model# 72044NE2/AEJ, Serial# 14051103/82303, Working Length 8.5', Rigging Fee $250 5041 GESSNER Heat Transfer Printer Press. Hot Oil. Serial  RPS 112.  80” x 60” Diameter, Rigging Fee $250 5042 Lafer Double Shearer, Model# CMS2 87233, Working Length 6' 10", Rollers 7' 3", Rigging Fee $250 5045 Cor-Safe Hydralign, Working Width 5' 10", Rigging Fee $35 5087 Lamperti SPA Shear, Working Width 95", Model# D81810ATC4, Rigging Fee $150 7078 Erhard Leimer Guiding Fingers System, Qty 10, Rigging Fee: $25 7079 Erhardt Leimer KR 48 Motor Guiding Systems 42 Volts / DC 3.5 Amp, Rigging Fee: $25 7082A Maxon Gas Burner Model 400 Overpack II Size 425, Rigging Fee: $25 7082B Maxon Gas Burner Model 400 Overpack II Size 415, Rigging Fee: $25 7083 Maxon Gas Burners Overpak Size 425. Assembly 53550. 11 92 (2 used units), Rigging Fee: $25 7094 Menzel Hydraulic units double motor model STB 220/460 Volts   Serial 02451 , Rigging Fee: $25 7095 Menzel Hydraulic Unit. Model SPE. Serial 01081. 3Hp.  220/460 Volts, Rigging Fee: $25 7096 Menzel. 5 HP. 230/460 Volts. Forward and Reverse., Rigging Fee: $25 7097 Barker Products.  Model PV.  Serial 50053.  3HP. 230/460 Volts, Rigging Fee: $25 7098 Hydraulic units 5HP 230/460 volts, Rigging Fee: $25 7099 Hydraulic unit 7.5 HP 220/460 Volts. Reversing Motor , Rigging Fee: $25 7100 Menzel  Model SPB  serial 02152 7.5 HP. 230/460 volts, Rigging Fee: $150 7101 Menzel SPD  7.5 HP 220/460 volts, Rigging Fee: $150 7105 Power Tec Unwinding  Machine 3Hp 380 Volts DC, Rigging Fee: $150 7106 Menzel electric unwinding model Type MM 01008 8 92 160/180 Volts DC, Rigging Fee: $150 7107 Pneumatic Compressor Dryer Model  AD 400 400CFM 1590 psi 220 Volts, Rigging Fee: $50 7108 Zelda Air Dryer compressor model 250H se 16237 volt 460 , Rigging Fee: $50 7109 Disc Opener STUMMER Kontstruktion Model 89336- EWG Mev 73 23 480 Volts, Rigging Fee: $250 7112A 5 Hp mixer 1750 RPM 220 volts, Rigging Fee: $25 7112B 30HP mixer 175o Rpm 220/460, Rigging Fee: $25 7130A Maxon Gas Burners Modulated Completely system Model 4000 Ovenpak II size 408 Assembly  402-9-01(6 complete units), Rigging Fee: $25 7130B Maxon Gas Burners Modulated Completely system Model 4000 Ovenpak II size 408 Assembly  402-9-01(6 complete units), Rigging Fee: $25 7137 Rollout  Machine 120” Long x 10”diameter w/ Alignment Control, Air Clutch Brake System 220/480 Volts, Rigging Fee: $150 7138 Joseph Pernick  Inspection machine Model T4 70 Serial 1280P 3.3Hp 120 volts A.C., Rigging Fee: $100 7139 Morrison Surface Wind / Unwind Machine Serial 81-118  Model TENV  5hp 220 Volts DC 7' long x 8”diameter, Rigging Fee: $25 7140 Intra Model CU4U Serial 99010 1999 Center Hydraulic Unwinding Machine. 165” long 220 Volts, Rigging Fee: $150 7141 Cutting panels machine 10' 120 volts, Rigging Fee: $150 7142 Morrison pad hydraulic Machine model T 491  year 1988  10' wide 10” Diameter double roll 220/480 Volts, Rigging Fee: $250 7143A GASTON COUNTY Panel MP 6000 serial 99470 Assembly W/o 308560 - Two Panels, Rigging Fee: $25 7143B GASTON COUNTY Panel MP 6000 serial 99470 Assembly W/o 308560 - Two Panels, Rigging Fee: $25 7144 Winder Machine and Tension control. DC 2hp 220 volts , Rigging Fee: $50 7145 Winder Machine and air control tension 2HP 220 volts , Rigging Fee: $50 7146 SCTM  Winding and unwinding Machine serial Number 0150 17551 5hp 220 volts. Follower card and tension device, Rigging Fee: $50 7147 Winder  7.5 HP 220 Volts , Rigging Fee: $50 7148 Coratron Braking device tension and Pressure Percent, Rigging Fee: $50 7150 ISOTEX Winding and unwinding 72” Age guiding  systems 3HP 220 Volts, Rigging Fee: $50 7153 Kiltex C Surfers Unwinding and Windings machine 80” with compensators and oscillator rolls 3hp 220 Volts, Rigging Fee: $50 7154 Used Dryer Belt Size 58”X32’X2”, Rigging Fee: $25 7155 Used Dryer Belt size 84”X 32’, Rigging Fee: $25 7156 New Dryer Belt 90,55”X100.5’x12”, Rigging Fee: $25 7157 New Stork Dryer Belt 116”X110’, Rigging Fee: $25 7158 New Stork Belt 134”X125’X6”, Rigging Fee: $25 7159 Used Dryer Belt 80” 35’x4”, Rigging Fee: $25 7160 New Dryer Belt 105”x21’X 4”, Rigging Fee: $25 7162 New Asten Dryer Belt 105”X21’X 4”, Rigging Fee: $25 7163 New Samtex Wooden Feeding Belt. 103”X 15’X10”, Rigging Fee: $25 7164 Menschnerr Relaxing Fabric Machine 72”  7.5 Hp 220/460 volts, Rigging Fee: $50 7166A Web Guiding KFA 4510 with Electrical Control Panel SE06014 110”long, Rigging Fee: $50 7166B Erhardt Leimer bar 110” for web guiders, Rigging Fee: $50 7170 A-Frame. 80” long X 16” Diameter 45”H, Rigging Fee: $25 7172 Four roll textile unwind cradle with idler rolls 130'' inches long, can handle roll diameters of 12" inches. Mounted wheels allow for easy transport to different locations as needed., Rigging Fee: $100 7173 Unwinding and Winding 70” Wide Free Tension and Chucks For Rolling, Rigging Fee: $100 7174 Trumeter Model 2070 Series 2000. Type D Ref 1012500 electronic counters and  manual counters YDS and Meters(4 sets 8 units), Rigging Fee: $25 7175 TRUMETER  Model 200. Serial 20. Three manual counters. Yards (8 units), Rigging Fee: $25 7180 New Dryer Belt (3 holes damaged) 78”x 20’, Rigging Fee: $25 7182 EVAC vacuum system. Nash pomp SHR 856. Serial 68315.   50 HP 460volts, Rigging Fee: $25 7183 ISOTEX Winder 72.” Unknown winder 72” between 1.25 Chucks. Alignment control for 4 Rolls. (Special Machine for Bonding), Rigging Fee: $50 7184 SCRAY 168” Long. 2 Pieces. Compensator Type  Menzel. Motor 5HP DC 220 Volts, Rigging Fee: $250 7191 Unwinding A Frame And Tension Device. AC Motor 460 volts 5Hp, Rigging Fee: $25 7192 Menzel Winder for Roll On A Frame. 84” wide. Model 86SB  Serial # 02657 HP 7.5  575 Volts AC, Rigging Fee: $25 7193 Branson Ultrasonic Slitter Table.  Model F120 Power Amplifier Branson 900 BC and ACA. 120 Volts AC. Continues Slitter, Rigging Fee: $25 7194 Fabric Rolling and Packing. 78” wide. Two rolls 10” Diameter. Automatic Edge Alignment. Adjustable Rolls Harness and Adustable Fabric. DC Motor 3HP 220 Volts DC, Rigging Fee: $50 7196 Kranz  Exit  Frame  Roll 108” x 2”diameter. With  Three Roll Compensator and Stainless Steel Scroll Roll. 3 HP 220 Volts DC, Rigging Fee: $50 7197 Mixer COWLES Dissolver 400 Gallons. 2 Motor 50 HP Hydraulic Pumps 575 Volts, Rigging Fee: $50 7198 Tub Tex. 48” tubular fabric steamer opener  5 HP   220 volts DC, Rigging Fee: $100 7199 Hiltex Automatic Folding System. Model 45122.  Serial 1032. Volts 220 60HZ, Rigging Fee: $100 7200 Kranz  120”  3 Roll Compensator Model Comp. Serial 12002.5, Rigging Fee: $150 7201 Tendematic Guiding and accumulating system. 108” working width. Tension free. Dancer roll, Rigging Fee: $150 7202 Nip Roll 72”Face x 12” Diameter and 4” shaft  (New Rubber), Rigging Fee: $50 7204 Hauser. Model Comtac 3000 Automatic Cut Panels  and Stacking System, Rigging Fee: $150 7209 Nip roll 79” Face x 15” Diameter x 4” shaft, Rigging Fee: $50 7300 Nip Roll 72” Face x 20” Diameter X  5” shaft, Rigging Fee: $50 7305 Krantz Compensator 120” Long  - 3 Rolls, Rigging Fee: $150 7547 Holding Tank Mixer 32”x38” Diameter. Not Insulated cone. 1.2 HP 220/460 Volts, Rigging Fee: $50 7548 Holding Tank Mixer 32”x38” Diameter. Not Insulated cone. 1.2 HP 220/460 Volts, Rigging Fee: $50 7549 Holding Tank Mixer 32”x38” Diameter. Not Insulated cone. 1.2 HP 220/460 Volts, Rigging Fee: $50 7550 Holding Tank Mixer 32”x38” Diameter. Not Insulated cone. 1.2 HP 220/460 Volts, Rigging Fee: $50 7552 CONSEW Model 326. One or Two Needle Chainstitch Machine. High Speed. For Sewing Light to Medium Weight Fabrics, Rigging Fee: $20 7553 Rimoldi 264 Chainstitch Elastic Attachment 4 Multi Needle Industrial Sewing Machine (4 Units ), Rigging Fee: $25 7554 SKF Textile Machine  Automatic Lubrication and Programmable System. Model  1254106.  Serial 00405 D. 110 Volts Ac, Rigging Fee: $25 7559 Kingline Special Model KA 1150 Chain Stitch Industrial Sewing Machine, Rigging Fee: $25 7564 Dornier Jet feeders Power Surply. Model 56C 307  Serial 16957 (2 units ) IRO Feeders Model 5020.08.26 Laser (2 units ), Rigging Fee: $25 7565 Teledyne Rotolite  Diazo Jet  Mark II. Model K 27C 647, Rigging Fee: $25 8000 Joseph Pernick Co Inspection Machine, Model# TM-1360, Serial# 9527, Working Width 130", 110V, Rigging Fee $150 8037 A Frame. 75” long  X42”H (4 Units), Rigging Fee: $25 8052 EVAC Dual pump Model 8MF. Serials 269100. 279100. Rotatory Positive Blowers. Motor 100 HP 230460 Volts 1770 RPM, Rigging Fee: $250 9000 Kleinwefers Calender, Working Length 68", 25 HP, 230V, 3 Rolls, Gas, Rigging Fee $200 9002 General Projects Inspection Machine. Working with 85” Inspection Table 53”x58”. With winding backside to the operator, Automatic edge alignment, Ajustable Roll Hardness and Ajustable Fabric Tension Control, Rigging Fee: $250 9003 Branson Ultrasonic Cutting, 184V, Working Width 160", Rigging Fee $100 9004 EDUARD KUSTERS Type 222.54-4000. Year 1978. Serial # 13338887  163” W 20HP  460 Volts, Rigging Fee: $250 9005 Rollow Machine, Working Width 112", 3 HP, 440V, Hyraulic, Center Winder, Rigging Fee $100 9006 Comet Sander Machine, 82" Working Width, 3 HP, 8 Roll Sander Machine, Rigging Fee $150 9007 Intra Inpsection Machine, Model R, Serial# 95.013, Working Length 94", 10 HP, Good Condition, Rigging Fee $100 9008 Intra Inspection and Roll Up Machine, Model# LM-112, Serial# 93.074, Working Width 94", Good Condition, Rigging Fee $200 9009 Intra Inspection and Roll Up Machine, Model# SB5HSH, Serial# 93074, Working Width 94", Good Condition, Rigging Fee $200 9010 Aspirator, Model# Finpol-3. Serial# 980496712, 480V, Rigging Fee $25 9011 Aspirator, Model# Finpol-3. Serial# 980496714, 480V, Good Condition, Rigging Fee $25 9012 Aspirator, Model# Finpol-3, 480V, Good Condition, Rigging Fee $20 9015 Herman Rubber & Plastic Machinery, Serial# 0042019, Working Width 80", Good Condition, Rigging Fee $50 9016 Cooper Inspection Machine, Working Width 130", Good Condition, Rigging Fee $150 9017 Roll Up Machine, Working Width 112", Rigging Fee $50 9018 Tub Tex Automatic Pipes Rollup 112”  (8”Diameter) Tension Control and Cross Cutting, Rigging Fee $100 9019 Menzel A Frame Winder 72” Model HA7800. Serial S2000. 5HP 200460 Volts AC, Rigging Fee $50 9020 Abinton Inc Vacuum Cleaning System, Lint Collector, Rigging Fee $75 9021 Osthoff System Double Jet, Serial# 2A76-21271, Working Length 78", Rigging Fee $50 9022 Diversified Systems Inc. Roll Up Machine, Working Length 234" x 16", Rigging Fee $100 9027 Roll Up Machine, Working Width 218", Rigging Fee $100 9028 Cradle Put Rolls, Model# 29169, Serial# 041870, Working Width 223", Rigging Fee $100 9029 Automatic Continuous Winder, Model# 87760, 48-242, Working Width 138", Good Condition, Rigging Fee $150 9030 Winder, Working Width 148", Good Condition, Rigging Fee $75 9031 Winder, Working Width 120", Good Condition, Rigging Fee $150 9032 Kranz Winder and Compensator. Working width 120, Rigging Fee $150 9033 J.W. Lewis Inc. Textile Trucks, Model# CS-WA0-TB, Serial# 10241, Working Width 75", Rigging Fee $25 9035 Intra Unwinder, Model# BVC 48, Serial# 93074, Working Width 87", Rigging Fee $150 9037 Roll Up Machine, Working Width 77", Rigging Fee $75 9039 Inspection Machine, Working Width 220", Rigging Fee $200 9040 Gualchierani Automatic Baling Presses For Staple Fiber which Double Revolving Box High Capacity.  Model  Press PVS10.  575 volts 17 KW   Year 2002, Rigging Fee $200 9045 ICS Texicon 60" Dispenser, Model# DSIII-104, Serial# DS310490108, Rigging Fee $75 9047 Gaston County Dyeing Machine, Model# 1.4414, Serial# 2.21.89, Working Width 6", 2 HP, 575V, Rigging Fee $40 9048 Kusters Co. Pad Machine, Type# 225.72, Order# M17398, Year 1992, Rigging Fee $75 9049 Weather-Ometer, Model# 25/18-WT, Serial# WEX-332, 208V, Rigging Fee $50 9052 Parks-Woolson Polisher Machine, Serial# 11717, 25 HP, 230/460V, Rigging Fee $100 9054 Stork Washer Drum, Working Width 87", 1 HP, 230V, Rigging Fee $30 9055 Crown Fork Truck, Serial# 1A188331, Model SP3020-30-S. 24 Vots DC, Rigging Fee $50 9057 General Projects Inspection Model TIM 2000 S# 081892. Tension Alignment Control. 220 VDC, Rigging Fee $200 9058 Birch Inspection Machine, Model# 103-870, Serial# 89-344, Working Width 130", 2 HP, 230V, Rigging Fee $100 9061 Griffin Applicator, Model# SA2R865756, Working Width 78", Rigging Fee $100 9063 Applicator Machine, Working Width 80", 2 HP, 230/460V, Rigging Fee $100 9064 BOND Winder  72” Wide. Aliment Control 460 Volts, Rigging Fee $50 9067 Osthoff Sensor, Model# VP-1, Serial# 6134, Working Width 82", Rigging Fee $150 9068 Kranz Inspection Machine, Model# IDUW, Serial# 6061, 80" Working Width, 180V, Rigging Fee $250 9069 Greenville Machinery Bond Roll Up Machine, Serial# 2379-16, Working Width 86", 208/230V, Rigging Fee $150 9070 Rollup Machine In A-Frame. 2 Rolls 150” long.  12.5” Diameter, Rigging Fee $50 9082 Pump ARO, Type L#160, Quantity 25, Rigging Fee $100 9090 Menzel Winder, Type 80SBF, Serial# 01059, 5 HP, 200V, Working Width 80", Rigging Fee $150 9092 Parks & Woolson Shear, Serial# 12085, Working Width 84", 5 HP, 230/460V, Rigging Fee $150 9094 Park Woolson Shear Machine  82”Wide   Serial 12084  8” DiMeter revolver. 7,5 Hp 220/460 Volts , Rigging Fee $150 9176 Trumeter Model 70KTD - 1989 2 manual counters YAR and Meters (Qty 5 units), Rigging Fee: $25 9205 Kuster Padder 128” (2x16”Diameter) Rubber to Steel Model M 7977. Serial 255-74, Rigging Fee $250 9206 Greenville 80” Padder 2 X 18” Diameter Rolls Rubber to steel. Pneumatic Pressure Stainless Steele  Dip Pan, Rigging Fee $250 9207 Parkinson Automatic Rollup Machine. 78”  Model 93 0280 with control tension and pull roll, Rigging Fee $250 9208 Morrison 95” Padder. 2 x 18” Rubber Rolls. Pneumatic Pressure. Stainless Steel Dip Tank, Rigging Fee $250 11002 Tow Washing Line – Stainless Steel, 12 Dip Tanks, 9 Rubber Squeeze Pads, 24" Working Width, Total Length of Machine 25', Comes with Allen Bradley Control Panel, Rigging Fee $250
Click here for more information.

Online Only Auction - Boeing Surplus Assets

July 9, 2020, 5:14 am

≫ Next: Online Only Auction - Surplus Assets of Stark Machinery/ Starmarc Inc.

≪ Previous: Online Only Auction - Surplus Assets of Ava Industries

$

0

0

Online Only Auction - Boeing Surplus Assets Surplus To The Ongoing Operations at Boeing
	Online Bidding Only Begins: Thursday, July 30, 2020 at 10:00 AM CDT Location: 5775 Campus Pkwy, Saint Louis, MO, US, 63042 Lots Include Lincoln Town Cars, Baldor SuperE Motors, Pumps & More!
DETAILS The inspection day will be July 29th, 8:30 am to 2 pm by appointment only. Please email Riley at rileym@schneiderind.com to set up an appointment. Walk-in appointments will not be welcome. Rigging and Pickup information to be added shortly   Lot # Lot Description 0 Cushman A130 4 Wheeler, Total Number of Hours = 2008.9 1 Lincoln Signature LTown Car (More Information including mileage to be added soon) 2 Lincoln Signature L Town Car (More Information including mileage to be added soon) 3 Lincoln Signature L Town Car (More Information including mileage to be added soon) 4 Lincoln Signature L Town Car (More Information including mileage to be added soon) 5 Lincoln Signature L Town Car (More Information including mileage to be added soon) 6 Lincoln Signature L Town Car (More Information including mileage to be added soon) 7 Herr-Voss Metal Break, Volts 460, Hertz 60, Phase 3 8 Baldor SuperE 40 HP Motor & Paco Pump, S/N #1971114326, Cat. #11-50123-1A6L01-2892P 9 Baldor SuperE 40 HP Motor & Paco Pump 10 Baldor SuperE 25 HP Motor & Paco Pump 11 Baldor SuperE 25 HP Motor & Paco Pump 12 Baldor SuperE 40 HP Motor & Paco Pump 13 Baldor SuperE 40 HP Motor & Paco Pump 14 Baldor SuperE 40 HP Motor & Paco Pump 15 Baldor SuperE 25 HP Motor & Paco Pump 16 Baldor SuperE 25 HP Motor & Paco Pump 17 Baldor SuperE 25 HP Motor & Paco Pump 18 Baldor SuperE 40 HP Motor & Paco Pump 19 Baldor SuperE 40 HP Motor & Paco Pump 20 Baldor SuperE 25 HP Motor & Paco Pump 21 Baldor SuperE 25 HP Motor & Paco Pump 22 Baldor SuperE 75 HP Motor & Paco Pump 23 Baldor SuperE 75 HP Motor & Paco Pump 24 Baldor SuperE 75 HP Motor & Paco Pump 25 Baldor SuperE 100 HP Motor & Paco Pump 26 Baldor SuperE 100 HP Motor & Paco Pump 27 Baldor SuperE 40 HP Motor & Paco Pump 28 Baldor SuperE 40 HP Motor & Paco Pump 29 Baldor SuperE 50 HP Motor & Paco Pump 30 Baldor SuperE 100 HP Motor & Paco Pump 31 Baldor SuperE 100 HP Motor & Paco Pump 32 Baldor SuperE 50 HP Motor & Paco Pump 33 Baldor SuperE 100 HP Motor & Paco Pump 34 Baldor SuperE 40 HP Motor & Paco Pump 35 Baldor SuperE 100 HP Motor & Paco Pump 36 Baldor SuperE 50 HP Motor & Paco Pump 37 Baldor SuperE 100 HP Motor & Paco Pump 38 Baldor SuperE 50 HP Motor & Paco Pump 39 Baldor SuperE 75 HP Motor & Paco Pump 40 Baldor SuperE 50 HP Motor & Paco Pump 41 Baldor SuperE 50 HP Motor & Paco Pump 42 Baldor SuperE 150 HP Motor & Paco Pump 43 Baldor SuperE 150 HP Motor & Paco Pump 44 Baldor SuperE 75 HP Motor & Paco Pump 45 Baldor SuperE 40 HP Motor & Paco Pump 46 Baldor SuperE 40 HP Motor & Paco Pump 47 Baldor SuperE 60 HP Motor & Paco Pump 48 Baldor SuperE 100 HP Motor & Paco Pump 49 Baldor SuperE 100 HP Motor & Paco Pump 50 Baldor SuperE 60 HP Motor & Paco Pump 51 Baldor SuperE 50 HP Motor & Paco Pump 52 Baldor SuperE 60 HP Motor & Paco Pump 53 Baldor SuperE 100 HP Motor & Paco Pump 54 Baldor SuperE 100 HP Motor & Paco Pump 55 Baldor SuperE 100 HP Motor & Paco Pump 56 Baldor SuperE 100 HP Motor & Paco Pump 57 Baldor SuperE 100 HP Motor & Paco Pump 58 Baldor SuperE 100 HP Motor & Paco Pump 59 Baldor SuperE 40 HP Motor & Paco Pump 60 Baldor SuperE 15 HP Motor & Paco Pump 61 Baldor SuperE 100 HP Motor & Paco Pump 62 Baldor SuperE 20 HP Motor & Paco Pump 63 Baldor SuperE 40 HP Motor & Paco Pump 64 Baldor SuperE 20 HP Motor & Paco Pump 65 Baldor SuperE 20 HP Motor & Paco Pump 66 Baldor SuperE 25 HP Motor & Paco Pump 67 Baldor SuperE 25 HP Motor & Paco Pump 68 (1) Peerless Vertical Turbine Pump, Model #10HXB, H-ft 60, GPM 600, Serial #1971114326-250-B, RPMS = 69 (1) Peerless Vertical Turbine, Model #10HXB, H-ft 60, GPM 600, Serial #1971114326-250-C, RPMS = 1770 70 (1)Peerless Vertical Turbine Pump, Model #M12MB, H-ft 20, GPM 776, Serial #1971114326-250-A, RPMS = 71 (1) Peerless Vertical Turbine Pump, Model #10HXB, H-ft 60, GPM 600, Serial #1971114326-250-A, RPMS = 72 (3) Peerless Vertical Turbine Pump, Model #71B, H-ft 252, GPM 97, Serial #1971114326-250-B, RPMS = 73 GE 15 HP Motor, Model #5KS254SAE6043, S/N #BKFT060S002, RPMS 1775, Frame = 1.254TP10, Phase 3 74 GE 15 HP Motor, Model #5KS254SAE6043, S/N #BKFT060S001, RPMS 1775, Frame = 1.254TP10, Phase 3 75 GE 10 HP Motor, S/N #CKFT0343049, RPMS 1733, Frame = 1.254TP10, Phase 3 76 GE 7.5 HP Motor, Model #5K32130AE50393 77 GE 10 HP Motor, S/N #CKFT054S034, RPMS 1733, Frame = 1.254TP10, Phase 3 78 GE 15 HP Motor, Model #5KS254SAE5043, S/N #BKFT060S004, RPMS 1775, Frame = 1.254TP10, Phase 3 79 GE 10 HP Motor, S/N #CKFT075S037, RPMS 1733, Frame = 1.254TP10, Phase 3 80 2 Stage Bowl Assembly 81 Steel Plates
Click here for more information.

Online Only Auction - Surplus Assets of Stark Machinery/ Starmarc Inc.

July 16, 2020, 6:47 am

≫ Next: Cat & Deere Earth-Moving, Tractor Heavy Equipment Sale from Major Energy Company

≪ Previous: Online Only Auction - Boeing Surplus Assets

$

0

0

Online Only Auction - Surplus Assets of Stark Machinery/ Starmarc Inc. Facility Support and Auxiliary Equipment & Machinery
	Online Bidding Only Begins: Tuesday, July 21, 2020 at 10:00 AM CDT Location: 1960 Langston St, Rock Hill, SC, US, 29730 Contact Josh S at joshs@schneiderind.com with questions. Features: Forklifts, Stainless Steel Tanks, Electrical Compenents, Lab and Testing Equipment, Blowers, Conveyors, Drives, Motors, Gears, and Much More!!
Number Description 2 TCI  Electric Shuttle. Model 895 Serial 6028, Riggning Fee: $25 4 Crown Center Rider Pallet Truck. 8000 lbs. Capacity. Model 80PC-S. Serial 6A107250. 24 Volts DC, Riggning Fee: $25 166 Pins for Tenaframe Machine, Total 21 Boxes, 5457 Pins: 4 boxes of pins, total qty of pins 1,593, Pin Plate # 148-ST-36,  No Plate, 1 Box, 147 Pins Plate #PP2247, 1 Box, 912 Pins, Plate #PP2126, 1 Box, 858 Pins, Plate # PP2014, 4 Boxes, 1104 Pins, Plate # PP2012, 1 Box, 42 Pins, No Plate, 1 box, 55 Pins, Plate # DP1961394/DP1106877, 1 Box, 11 Pins, Plate# 173, 1 Box, 107 Pins Plate # 166-ST-58, 1 Box, 413 Pins, Plate #122, 1 Box, 46 Pins, Plate # 89, 1 box, 84 Pins, No Plate, 1 box, 36 Pins, No Plate, 1 box, 36 Pins, No Plate/ curved base, 1 box, 39 Pins Rigging Fee $25 217 Suction Fans 5HP 220/460 volts 1750 Rpm, Rigging Fee: $25 466 Sackett System Pull Batteries Model PTC 24VDC  Serial A1619-1, Rigging Fee: $25 610 American Fan IE 13 HH 10HP 220/460volts 1750RPM, Rigging Fee: $25 640 American Fan 5HP 1759RPM 230/460 volts series IE 9 MH, Rigging Fee: $25 671 Stainless Steel Tank, 62 inches Diameter, 48.25 inches Height, Agitator/Mixer, Discharge Side and Bottom, Rigging Fee $50 672 Stainless Steel Tank, 63.75 inches Diameter, 75.5 inches Height, Discharge Bottom,&nbsp;Rigging Fee $50 677 Stainless Steel Tank, 64 inches Diameter, 52.5 inches Height, Agitator/Mixer, Discharge Bottom,&nbsp;Rigging Fee $50 679X Stainless Steel Tank, 41.75 inches Diameter, 40 inches Height, Discharge (Side),&nbsp;Rigging Fee For This Item Is $30 684 Stainless Steel Tank, 59.5 inches Diameter, 48.5 inches Height, Agitator/Mixer, Discharge Bottom,&nbsp;Rigging Fee $50 686 Stainless Steel Tank, 58 inches Diameter, 48.5 inches Height, Agitator/Mixer, Insulated, Discharge Side,&nbsp;Rigging Fee $50 687 Stainless Steel Tank, 58.25 inches Diameter, 48.5 inches Height, Agitator/Mixer, Insulated, Discharge Side and Bottom,&nbsp;Rigging Fee $50 688 Stainless Steel Tank, 56.5 inches Diameter, 48.5 inches Height, Agitator/Mixer, Discharge Side and Bottom,&nbsp;Rigging Fee $50 690 Stainless Steel Tank, 64 inches Diameter, 76.5 inches Height, Agitator/Mixer, Discharge Bottom,&nbsp;Rigging Fee $50 692X Stainless Steel Tank, 51.75 inches Diameter, 52.5 inches Height, Heated Coil, Discharge (Side and Bottom),&nbsp;Rigging Fee For This Item Is $30 700 Stainless Steel Tank, 64 inches Diameter, 52.5 inches Height, Agitator/Mixer, Discharge Bottom,&nbsp;Rigging Fee $50 4001A Laboratory Samples, Rigging Fee: $25 4001B Laboratory Samples, Rigging Fee: $25 4001C Laboratory Samples, Rigging Fee: $25 4002 Ahiba 1000 Samples Test, Rigging Fee: $25 4003 Macbeth Spectralight Model SPL-75B / Serial 00343, Rigging Fee: $25 4004 L&amp;W Machine Works Laboratory Equipment - 14" Pad, Rigging Fee: $25 4005 Lindbergh / Blue Oven MO1450RHDA Lab Equipment, Rigging Fee: $25 4006 Pantone Color Viewing Light, Rigging Fee: $25 4007 Macbeth Executive Light Test, Rigging Fee: $25 4008 SUGA Test Instruments Co. Ltd. - Rubbing Meter Model FR-2, Rigging Fee: $25 4009 Precision Scientific PS Model, Rigging Fee: $25 4010 Daiei Seiki Co., Ltd. SEAM Damage Tester, Rigging Fee: $25 4011 Ruti Stroboscope Model 3050 / Serial 3687482, Rigging Fee: $25 4012 Werner Mathis Model LTF, Rigging Fee: $25 4013  AHIBA Type TC101 G VII B Nr 0586890 220 volts 60Hz, Rigging Fee: $25 4014A Macbeth Spectralight Model SPL75B / Serial 50309, Rigging Fee: $25 4014B Macbeth Spectralight Model SPL75B / Serial 90047, Rigging Fee: $25 4015 Launder-ometer Model B-5 Serial LO-2106, Rigging Fee: $25 4016 The Grieve Corp Oven Model EAF-270 Serial 1082, Rigging Fee: $25 4034 Hunter Lab spectrophotometer Lab scan XE Reflected color  serial LX 16185, Rigging Fee: $5 4035 Hunter Lab Spectraphotometer, Rigging Fee: $5 4036 Macbeth Color Eye  Model M200IR   Serial 22123820 120 volts, Rigging Fee: $5 4037 ACS CS-5 CHROMA SENSOR Color System Serial 0175, Rigging Fee: $5 4038 CS 3 datacolor CHORMA SENSOR Serial 3358, Rigging Fee: $5 4039 Thermolyne  Model Hp 72935-60 serial 799980929560, Rigging Fee: $5 4040 Corning Stirrer - Hot Plate Model  PC-260 110 Volts, Rigging Fee: $5 4041 Atlas Scorch Tester  Model SO-3B Serial ST 990   110 Volts, Rigging Fee: $5 4042 Fischer Scientific  Accumet PH Meter 915, Rigging Fee: $5 4043 PH COLE PARMER PH Tester. Model 5996  Serial 02101350, Rigging Fee: $5 4044 Alfred Suter Co Tester, Rigging Fee: $5 4045 Atlas Scorch Tester Model 50-3A. Serial ST-819  110 volts, Rigging Fee: $5 4046 Taber Industries 550. Shear-Scratch Tester.  Serial 20042398, Rigging Fee: $5 4047 Electronic Brazing Co. Stroboscope Model TS 805 BU  Serial 6668, Rigging Fee: $5 4048 Delmhorst  Moisture Detector Model C 1, Rigging Fee: $5 4049 Strandberg Textile Durometer Type  DP 2, Rigging Fee: $5 4050 STRANDBERG Moisture Meter Model M 200 A, Rigging Fee: $5 4051 STRANDBERG  Moisture Meter Model M200, Rigging Fee: $5 4052 YSI Teste  Salinity  Conductivity Temperature  model  3010 FT Serial 04G12923 AF, Rigging Fee: $5 4053 MINI  Uster   model MIU. Serial 4540, Rigging Fee: $5 4054 Zellweger Mini Uster  Type CMT - EG  Serial 4981 1084, Rigging Fee: $5 4055 Fisher PH Meter Model 230  Serial 1788, Rigging Fee: $5 4056 A.A.T.C.C. Crockmeter  Model 5 Serial 7216. 110 Volts, Rigging Fee: $5 4057 Alfred Suther Yarn Twister Model 368 66, Rigging Fee: $5 4058 Mini Tens. R-O46  Model R 046 serial 8371, Rigging Fee: $5 4059 Minolta Croma Meter Model CR 110 (2 Units), Rigging Fee: $5 4176 CLARK PWD 30 40  Pallet Jack A Frame Mover. 24 Volts DC, Rigging Fee: $5 5046 Blower Model 1UTE1CINXX15020. 575 Volts. 1.5 Hp. 3450 RPM, Rigging Fee: $25 5047 Blower Model PW11. 1 Hp. 575 Volts. 3500 RPM, Rigging Fee: $25 5048 Dayton Blower Model 2C. 2 Hp. 575 Volts AC, Rigging Fee: $25 5049 Dayton Blower. Model 4C329. 575 volts. 2 Hp. 3500 RPM, Rigging Fee: $25 5050 Dayton Blower, Model 4C329. 2 Hp. 575 volts. 3500 RPM, Rigging Fee: $25 5051 Dayton Blower PW11. 1 Hp. 575 Volts. 3500 RPM, Rigging Fee: $25 5052 Blower Reffedue. Model Addensatore. Type ADD/A-700/32. Matricola ADD113. 333/575 Volts. .75 Hp. 1100 RPM., Rigging Fee: $25 5054 Dutchi Blower. Type DM 132 S2. 3480 RPM. 480 Volts., Rigging Fee: $25 5055 Turbo Blower Model # SM-8821, 575V, 60 Hz, Rigging Fee: $25 5058 Blowers, 230 / 480 Volts. 3400 RPM, Qty 4, Rigging Fee: $25 5060 Fan. 5Hp. 277/480 Volts. 3460 RPM, Rigging Fee: $25 5063 Blower Fan  Blade 52”Diameter. Shaft 3,5”, Rigging Fee: $25 5066 Motorized Conveyor with Pneumatic Piston Lift, 9' Long x 24" Wide, Rigging Fee: $25 5071 Hytrol conveyor serial 348160 model 190 RB 2 Plz (dimension 84”Lx30”w x 45”H), Rigging Fee: $25 5072 Getriebevbau Nord Conveyor Belt, (3) Pieces: (2) 20' Length x 18" Wide; (1) 6' Length x 18" Wide, Rigging Fee: $25 5081 Motorized Conveyor 472” long total 9 pcs Total 2pcs 80” 2pcs 52” 1pc 68” 2pcs 28” (Dimension 20”x 28” High), Rigging Fee: $25 5084 Allen Bradley Conveyers Belt motorized 20F total (dimension W22”X36” ), Rigging Fee: $25 5086 Stravelli Blower Fan. ART 711 / N9A / RD0. SN 391. 480/830 Volts. 2050 RPM, Rigging Fee: $150 5089 Blower cat 110715.00 575 Volts. 3450 RPM, Rigging Fee: $25 7000 Transformers, Qty 21, Rigging Fee: $25 7001 Transformers, Qty 12, Rigging Fee: $25 7002 Transformers, Qty 13, Rigging Fee: $25 7003 Drives, Qty 23, Rigging Fee: $25 7004 Drives, Qty 20, Rigging Fee: $25 7005 Drives, Qty 13, Rigging Fee: $25 7006 Drives, Qty 12, Rigging Fee: $25 7007 Drives, Qty 22, Rigging Fee: $25 7009 Breakers, Qty 40, Rigging Fee: $25 7010 Southworth Lift Model LL1-1-26  Serial GRO21A6 000  SNP23-5. Cap 1100Lbs  Motor 110 Volts 1/2 HP (2 Units), Rigging Fee: $25 7011 DC Drives, Qty 16, Rigging Fee: $25 7012 DC Drives, Qty 12, Rigging Fee: $25 7013 AC Inverters, Qty 10, Rigging Fee: $25 7014 Fittings, Connectors, Pneumatics, Qty 62, Rigging Fee: $25 7015 AC &amp; DC Drives, Qty 18, Rigging Fee: $25 7016 Stares &amp; Hires Protection Motors, Qty 53, Rigging Fee: $25 7017 Contactors, Qty 17, Rigging Fee: $25 7018 AC Drives, Qty 12, Rigging Fee: $25 7019 DC Drives, Qty 19, Rigging Fee: $25 7020 DC Drives, Qty 22, Rigging Fee: $25 7021 AC &amp; DC Drives, Qty 12, Rigging Fee: $25 7022 Motor Control Starter Relays Giter Protection, Qty 89, Rigging Fee: $25 7023 AC &amp; DC Drives, Qty 8, Rigging Fee: $25 7024 DC Drive 50hp and Instruments, Qty 19, Rigging Fee: $25 7026 Valves, Qty 9, Rigging Fee: $25 7027 Manual Valves, Qty 17, Rigging Fee: $25 7028 Couplings, Qty 53, Rigging Fee: $25 7029 Electric Disconnect, Qty 18, Rigging Fee: $25 7030 Sprinklers heat 20 box red  and  4 boxes cardboard, Qty 268, Rigging Fee: $25 7031 Dean pump RA Model 1-1.5 x 3/8.5 serial 181288 125GPM, Rigging Fee: $25 7031A Tone Cranes, Qty 2, Rigging Fee: $25 7031B Tone Cranes, Qty 2, Rigging Fee: $25 7032 Plastic Tubing, Qty 8, Rigging Fee: $25 7033 TubeTex opening rolls , Qty 7, Rigging Fee: $25 7034 Cutting Knives and Parts Activators (TOO MANY TO COUNT), Rigging Fee: $25 7035 Hydraulic Motors, Qty 21, Rigging Fee: $25 7036 Pneumatic Activators, Qty 31, Rigging Fee: $25 7037 Pneumatic Activators, Qty 30, Rigging Fee: $25 7038 Clutch for Breaking Devices, Qty 21, Rigging Fee: $25 7039 Flangers Manual Openers, Qty 18, Rigging Fee: $25 7040 Anchors For Concrete , Qty 26, Rigging Fee: $25 7041A Fittings, Connectors, Pneumatics, Qty 22, Rigging Fee: $25 7041B Fittings for Pneumatics, Qty 22, Rigging Fee: $25 7042 Tramp Steamers, Qty 31, Rigging Fee: $25 7043 Transformers, Qty 17, Rigging Fee: $25 7044 Sussman Generators Series 90, Qty 8, Rigging Fee: $25 7045A Ferro Battery Charger Model FR12H / 24vDC / 165 Amp, Rigging Fee: $25 7045B Ferro Charger Model FR12, Rigging Fee: $25 7046A Douglas Charger 12 vdc 220-460 - 100 Amp, Rigging Fee: $25 7046B Hertner I LA Charger - 3TEG - 220-460 - 12vd - 80 amp, Rigging Fee: $25 7047A Hertner Model TD 12-550 24vol DC 122amp 550 Volt, Rigging Fee: $25 7047B Hertner Model TD 36 550s 24v 122amp 550volts, Rigging Fee: $25 7048A Battery Charger Alltech Model AAE24 24vDC 120ac, Rigging Fee: $25 7048B Alltech Charger 24 vdc Model AAE 24 110ac, Rigging Fee: $25 7048C Charger SVR 24 volt 120 AC 25 amp, Rigging Fee: $25 7049A Charger Series LA 24 vdc 120 amp 220-460ac, Rigging Fee: $25 7049B GNB Charger Model GTC 11 12, Rigging Fee: $25 7050A Hertner B M-3TF18 36vdc 575av, Rigging Fee: $25 7050B Hertner B TE 15 865 220-460 195 Amps, Rigging Fee: $25 7051A Eagle 33PFE18B 36vdc 80 Amps 220-460 Volts, Rigging Fee: $25 7051B Ferro fiv FR120 24vols DC 50 Amps 220/460, Rigging Fee: $25 7052 Hertner TRC 24 vots 575 volts 125amps, Rigging Fee: $25 7053 Hertner TRC 12 24 vols DC 120 amp 575 vac, Rigging Fee: $25 7054 Hertner 3FS12 24 vols DC 575 AC 70 amps, Rigging Fee: $25 7056 Plastic Bins, Qty 62, Rigging Fee: $25 7059 Bolt Bins, Qty 2, Rigging Fee: $25 7060A Sylvania Transformer 34KVA 469.220.132AC, Rigging Fee: $25 7060B Sylvania Transformer 34KVA 460.230.130AC, Rigging Fee: $25 7061A SCR Transformer 63KVA 480 230Y.130AC, Rigging Fee: $25 7061B Federal Pacific Transformer 34 KVA 460.230Y 133 Volts, Rigging Fee: $25 7062A SS Transformer 16KVA 480 240/130vols AC one phase, Rigging Fee: $25 7062B Dongan Transformer 11KVA 460.220AC, Rigging Fee: $25 7062C Acme Transformer 30KVA 480.240vac, Rigging Fee: $25 7063A Hostile Motor 70 Hp RPM 1750 FR 364T 220/480, Rigging Fee: $25 7063B Hostile Motor 70 Hp RPM 1750 FR 364T 220/480, Rigging Fee: $25 7064A GED Motor 40 HP 480 Volts RPM 1750, Rigging Fee: $25 7064B Baldor Motor 25 Hp FR 284T 220/460, Rigging Fee: $25 7065A Helical Gear motor 220/460 1750 RPM 5 hp, Rigging Fee: $25 7065B Foote Gear Motors 1750 RPM 220/460 volts 2 hp, Rigging Fee: $25 7066 Unity Motor 125 Hp 480 Volts Frame 4450S, Rigging Fee: $25 7067A Powertec Motor Brushless DC Model 114A 1750 Rpm hp 2 vDC 320 - 6 motors, Rigging Fee: $25 7067B 5Hp Motor Frame With Da 112MS - 2 Motors, Rigging Fee: $25 7067C Reliance Motor 7.5 HP 254T 1750 RPM 230/460, Rigging Fee: $25 7067D Marathon Black Max 7.5 HP 220/480 Vols 375o RPM, Rigging Fee: $25 7068A Marathon Electric 254T 230/480 Volts 15Hp 1750 Rpm, Rigging Fee: $25 7068B Black Max Motor 5HP 223/470 Gear 1.30 Frame 184TC, Rigging Fee: $25 7069 FIFE Guide Hyfarly Unit Model E60B 2AA2A Serial 66470 295 - 4 Units, Rigging Fee: $25 7070 DC Motors for Forklifts Miscellaneous, Approximately 17 units, Rigging Fee: $25 7071 LEE VALVE CO3 model 88NB  V fig 252  M30 size 3 (Qty 2 valves), Rigging Fee: $25 7072A 3 Way Valve Medl 4 125 S 175 WOG B364-1, Rigging Fee: $25 7072B Robertshaw 3 Way Valves 250-3 125-3, Rigging Fee: $25 7072C Robertshaw Valve Model VC 230V Serial E97B375, Rigging Fee: $25 7073 Steam Safety Valves Miscellaneous, Approximately 30 units, Rigging Fee: $25 7074 Butterfly Valves - Miscellaneous Sizes, , Approximately 18 units, Rigging Fee: $25 7075 Fisher Valves, Approximately 18 units, Rigging Fee: $25 7076 Pressure Regulators for Steam, Approximately 25 units, Rigging Fee: $25 7077A Ahlstrom Pump CH 8266 55736 1.10 New, Rigging Fee: $25 7077B Morton Mcheks Pump SA27618, Rigging Fee: $25 7080 Model 4040Bp Pressure 5Kst cm, Rigging Fee: $25 7081 Model CX115 30 Gomez 50 PSIG 5Hp 1750Rpm, Rigging Fee: $25 7084 Fire Protection OS.X Gate Valve DI Body Flange 8 UL/FM, Rigging Fee: $25 7085A Chicago Fire Pump Model 74-21042-1 Type DSA 10012 GPM 3480 TDH 75. Motor 100 hp. 220/460 Volts. RPM 1780, Rigging Fee: $25 7085B Chicago Fire Pump Model 74-21042-1 Type DSA 10012 GPM 3480 TDH 75. Motor 100 hp. 220/460 Volts. RPM 1780, Rigging Fee: $25 7086A Chicago Fire Pump Model 74-211042-1 Type DSA 10012 TDH 75 GPM 3480 Motor HP 100 460/230 Volts, Rigging Fee: $25 7086B Chicago Fire Pump Model 74-211042-1 Type DSA 10012 TDH 75 GPM 3480 Motor HP 100 460/230 Volts, Rigging Fee: $25 7087A ITT AC Pump Size 6X4X14L Type 8100 Model 150 Serial 1-29316-01-2 CFM 900 Head 164 RPM 1760 Motor 60HP 1750 RPM 460/220 Volts (2 Sets), Rigging Fee: $25 7087B ITT AC Pump Size 6X4X14L Type 8100 Model 150 Serial 1-29316-01-2 CFM 900 Head 164 RPM 1760 Motor 60HP 1750 RPM 460/220 Volts (2 Sets), Rigging Fee: $25 7088 Mobile Oil Tanks Pump Transfer for Circle Knit Oil and Filtered 110 Volts, Rigging Fee: $25 7089 Steam Flogged Gate Valves &amp; Flow Industrial Diaphragm Valves, Rigging Fee: $25 7090 Steam Flangers Gate Valves Size 8 inch, Rigging Fee: $25 7091 Steam Gate Valves Flow Size 3 Inch, Qty 8, Rigging Fee: $25 7093 Walton Stout Rotary Blower. Model 04B10104 6952. Serial U80010. 25Hp. 1750 RPM. DoroFlow Rotary Blower Model CHBABA. Serial U800010, Rigging Fee: $25 7102 Vickers pump model C21F12 series A2R 5Hp 230/460 (2 units), Rigging Fee: $25 7103 Dock Jacks hydraulic units 3HP 230/460 volts series H25A, Approximate Qty 2, Rigging Fee: $25 7104A Zollig Hydraulic Pump. Type VS. 5 Hp. 230\460 Volts, Rigging Fee: $25 7104B Pump 5 Hp 220/460 volts, Rigging Fee: $25 7110 Siemens 575 Volts 400HP 1787 RPM, Rigging Fee: $25 7111 Air openers , Rigging Fee: $25 7113 Coveyor Belt 2pz 153”L 93”l X 30”W X 35H motorized white Electric panels , Rigging Fee: $25 7114 Conveyors 3pz. One 78”long. Two 157”long X 17"W X 36”H. Motorized, Rigging Fee: $25 7115 DELCO Steam Cleaning Systems Model versa series 100, Rigging Fee: $25 7116 CBC Carolina Blower Corp Model  3069D serial B6888 motor 10HP 1750RPM 220/460volts, Rigging Fee: $25 7117 CBC Carolina Blower Corp Model  3069D serial B6888 motor 10HP 1750RPM 220/460volts, Rigging Fee: $25 7118 Spencer Voltex Blower Model VB 037D serial 5000863 2 575vol 120cfm, Rigging Fee: $25 7119A Piller type EX 14-500 Nr 570 481 motor 220/460 3500RPM, Rigging Fee: $25 7119B Piller Motor Type EX 14 500 Nr 570 481, Rigging Fee: $25 7120A Siemens La 5096 VDE 0530 460/230 Volts 1400rpm, Rigging Fee: $25 7120B Siemens Blower motor La5096 VDE 0530 1400Rpm 460/230volts, Rigging Fee: $25 7121 Fuji master model D 35 serial A05561 1/2HP 110/220vols 3400Rpm, Rigging Fee: $25 7122 Ferrero Type ELVE  325 1.8HP 230/460volts, Rigging Fee: $25 7123 ESAM. Type Jet 7. 220/460 Volts. 3500 Rpm, Rigging Fee: $25 7124 Tendematic Openers (9 sets), Rigging Fee: $25 7125 Tendematic openers (3 Sets), Rigging Fee: $25 7126 HEWLETT-PACKARD  DraffProt DXL Model 7575A serial 2920A13657 , Rigging Fee: $25 7127 IOLINE LP 4000 servo Plotter serial P4093811, Rigging Fee: $25 7128 Task Force 9"  Band Saw Model BS922302W, Rigging Fee: $25 7129A Southworth Lift Model LL1-1-26  Serial GRO21A6 000  SNP23-5. Cap 1100Lbs  Motor 110 Volts 1/2 HP (2 Units), Rigging Fee: $25 7129B Southworth Lift Model LL1-1-26  Serial GRO21A6 000  SNP23-5. Cap 1100Lbs  Motor 110 Volts 1/2 HP (2 Units), Rigging Fee: $25 7129C Southworth Lift Model LL1-1-26  Serial GRO21A6 000  SNP23-5. Cap 1100Lbs  Motor 110 Volts 1/2 HP (2 Units), Rigging Fee: $25 7132A DODGE Gear box size 210WM2BA5 ratio 5,0, Rigging Fee: $25 7132B Vector gear box type E72 serial 90766790, Rigging Fee: $25 7133 Devilles Compresors double head 5Hp and 3Hp 220/460 volts model 44642, Rigging Fee: $25 7135 <p>Staples and Industrial Packaging Materials, Rigging Fee: $25</p> 7136 Industrial Air Cylinder, Rigging Fee: $25 7149 EVAC Vacuum Slat 7' long, Rigging Fee: $25 7151 Expanding Shafts 65”X3,  66”X3.   80”X3 .  134”X3 .  92”X3.  92”X3, Qty 6, Rigging Fee: $25 7165 Banana Roll 78” long  x 3”, Rigging Fee: $25 7168 Radiator  Aerovent Fan Model 24L225 Type EDP serial 1933049002 1 Hp 575 Volts 1750 RPM, Rigging Fee: $25 7169 Hydraulic Dolly, Rigging Fee: $25 7171 Manual Dolly, Qty 3, Rigging Fee: $25 7177 Atlas Capco Compresor Model GA 307 Pack. Serial 712 238. Oil serial 3355. Motor serial 50149901 16. Hp 30. 220/460volts. RPM 3450, Rigging Fee: $25 7178 Portable  Air  Compresor IRFB502020 5Hp 125 pIS 11.9CFM 110volts, Rigging Fee: $25 7179 LANDA Steam Cleaner Pressure Model VHW  4 2000. Serial VHW420021AG. 2000 PSI 3.5 GPM, Rigging Fee: $25 7181 Miller Welding Dialarc 250 AC/DC  Serial 1N138435. Volts 208/460 AC  250 Amps. AC / DC, Rigging Fee: $25 7185 Miscellaneous Tools For Industrial Maintenance and Welding Table (Drills Impacts Shop Saws etc), Rigging Fee: $25 7186 Boxes and Empty Cases (5 boxes and 3 cases), Rigging Fee: $25 7187 Conveyor FO #658978 mark 190-RBX Hytrol Conveyor 136”x36”x43 Motorize 1.5HP 230/460 Volts, Rigging Fee: $25 7188 Gear Puller Tools. Clutch Gear. Tons Hydraulic Gear. Gear poler. (Different sizes), Rigging Fee: $25 7189 Rigging Equipment  and Truck Supplies. Chain and Belts, Rigging Fee: $25 7190 Vacuum House Industrial and Commercial Grade . In Aluminum box, Rigging Fee: $25 7301 Yale Forklift LP Gas. 10,000 lbs. Model GLC100 MGNSAV090. Serial B818D01566S. Solid Tires, Rigging Fee: $150 7306 Portable Stack Rack  78” x 53” x 30”(130 pcs), Rigging Fee: $125 7307 Portable Stack Racks 60” x 60” x 46”(74 pcs), Rigging Fee: $75 7308 Portable Stack Rack 73”x48”x70” (22 pcs), Rigging Fee: $50 7309 Portable Stack Racks 60”x 48”x51” (5 pcs), Rigging Fee: $25 7400 Portable Stack Racks 60”x45”x47” (8 pcs), Rigging Fee: $25 7401 BT Pallet Jack, Rigging Fee: $25 7404 Forklift Extension Forks (2 sets 95”x5”) (1 set 84”x 5”), Rigging Fee: $25 7518 Multiton Pallet Jack. Serial 171466, Rigging Fee: $25 7519 Forklift Forks  (5” x 26)(4”x28)(2 pc 4” x 36”), Rigging Fee: $25 7520 Forklift Forks (43”x4”)(50”x4”)(44”x4”)(45”x4”), Rigging Fee: $25 7521 Forklift Forks (61”x5”) (38”x5”)(2 Sets 44”x4”)(43”x4”), Rigging Fee: $25 7522 Forklits Forks (2 Sets 44”x4”)(5”x44”) (71”x 4”), Rigging Fee: $50 7523 Forklift Forks (2 Sets 43”x4”)(34”x4”), Rigging Fee: $25 7524 Forklift Forks (42”x4”)(38”x4”), Rigging Fee: $25 7525 Forks Positioner  32” Wide x 42” x 4, Rigging Fee: $25 7526 Sideshifter.  36” Wide  48”x 4”, Rigging Fee: $25 7527 Fork Positioner  34” Wide 42” x 4”, Rigging Fee: $25 7528 Long Reach  attachment 48” wide X 32” long. For rolls, Rigging Fee: $25 7529 Forklift Drum clipper Attachment (2 sets), Rigging Fee: $25 7530 Freigline Paper Clamp Attachment Model LG 25C A9 3B  Capacity 2500 LBS, Rigging Fee: $25 7531 Cascade Lift Truck Attachment Model 35D DC 12A  Capacity 3500 lbs Serial 681160-00015P, Rigging Fee: $25 7532 Forklift Attachment 4”x 48” for Fabric rolls and paper, Rigging Fee: $25 7533 Forklift Attachment 44”x 52”. (For fabric and paper rolls), Rigging Fee: $25 7534 Forklits Attachment 40”X68 (for fabric and paper rolls), Rigging Fee: $25 7535 Forklift Attachment  48”x 48” ( for fabric rolls and paper), Rigging Fee: $25 7536 Forklift Attachment 43”x48”(for Fabric and paper rolls ), Rigging Fee: $25 7537 Forklift Attachment 36”x 58 (For fabric rolls an paper), Rigging Fee: $25 7538 Forklift Attachment 36”x54” (for Fabric and paper rolls), Rigging Fee: $25 7539 Attachment 120” long x 2.5 “ Diameter Carpet pole attachment (2 units ), Rigging Fee: $25 7540 Hercules Forklift Lifting Boom Attachment Model B1 644S21 2. Serial B 133  Capacity 4000 LBS, Rigging Fee: $25 7542 BRANSON ULTRASONIC CUTTING EQUIPMENT, Rigging Fee: $25 7543 Power-Tec Brushless Controls and AC DC Drives, Rigging Fee: $25 7545 AC DRIVES (2 Magnetek GPD 506-P5 460 Volts 198A. 2 Magnetek GPD 503 / 460 Volts 25HP. 1 Saftronics 460 Volts  96A), Rigging Fee: $25 7546 EASTMAN CLOTH CUTTING MACHINES, Rigging Fee: $25 7551 Holding Tank Mixer 32”x38” Diameter. Not Insulated cone. 1.2 HP 220/460 Volts, Rigging Fee: $50 7555 Holding Tank 85in x 80in daimeter. Not Insulated cone, Rigging Fee: $50 7556 Mixing Tank 42in. x 52in diameter. Insulated Cone. 575 Volts .43Hp  1750 RPM, Rigging Fee: $50 7557A Auto Reel  by  Booth Electrosystems In  Serial  0006.  110 Volts (2 units ) 7557B Auto Reel  by  Booth Electrosystems In  Serial  0006.  110 Volts (2 units ) 7558 Pneumatic 3” Holder for Crush Slitting (6 units ), Rigging Fee: $5 7560 Hydraulic Motor Parts and Control Valve, Rigging Fee: $25 7561 Manual Valves operator (Block or On- Off Valves ), Rigging Fee: $25 7562 Pneumatic Activator Control Valves, Rigging Fee: $25 7563 Gas Regulators and Maxon Shut Off Valve. Activator For Gas, Rigging Fee: $25 7566 Storage Cabinet with Miscellaneous Fuses From .5 Amps. To 1000 Amps AC &amp; DC Fuses. Cabinet Measures 36" W x 86" H x 12 D"., Rigging Fee: $50 7567 Pneumatic Air Cylinders, Rigging Fee: $50 7568 HEATER DUCT SECTION SYSTEM. High performance 400 OVENPAK ll Gas Burner MAXON. Size 408. Maximo Capacity 800.000 BTU hr. Workd with Chicago Blower. Size 13” 7.5 Hp  575Volts, Rigging Fee: $150 7570 DEVILBISS  Paint Spray Booth. Dimensions (144”x146”x96h) 5 Hp Motor 220-460 Volts Ac  3500 RPM, BUYER MUST SELF REMOVE 7571  EMPIRE Pro-Finish Sandblasting Model MH -36465-1  Motor 1 HP 110220 Volts  3500 RPM. Complete Equipment, Rigging Fee: $50 7889 Steam Flogged Gate Valves &amp; Flow Industrial Diaphragm Valves, Rigging Fee: $25 7890 Stem Flange gate valve 8”, Rigging Fee: $25 7891 Steam Flange Valves 3 inch, Rigging Fee: $25 7892 Generac Electric Generator LP Gas KVA 25 Model 3G20 Serial 071966675 3 Faces 120/220 Volts, Rigging Fee: $25 9023 Conveyor System, 118" Long x 24" Wide x 39" Tall, Rigging Fee: $25 9024 Conveyor System, 118" Long x 24" Wide x 39" Tall, Rigging Fee: $25 9097 Stainless Steel Mixing Tank, 47" x 42", 550/575V, Rigging Fee $35 9098 Stainless Steel Mixing Tank, 50" x 48", 550/575V, Rigging Fee $35 9099 Stainless Steel Mixing Tank, Rigging Fee $35
Click here for more information.

Cat & Deere Earth-Moving, Tractor Heavy Equipment Sale from Major Energy Company

August 26, 2020, 8:26 am

≫ Next: Surplus Assets to the Ongoing Operations of Trinity Foods & Genesis Organics

≪ Previous: Online Only Auction - Surplus Assets of Stark Machinery/ Starmarc Inc.

$

0

0

Cat & Deere Earth-Moving, Tractor Heavy Equipment Sale from Major Energy Company Accepting Offers Now Prior To Late-September Auction Date TBA
	Override: Sort by this Date/Time Begins: Saturday, June 14, 2025 at 07:00 AM CDT Location: Surplus from a Major Energy Company, Keenesberg, CO, US, USA   See specs, photos, and complete details:
Accepting Offers NOW prior to annoucement of Late Septemeber Auction Date  Please Contact Josh B. at 314-863-7711 or joshb@schneiderind.com   Preliminary List of Available Equipment:   Equipment Year Model Condition  Current Hours Last Service Preformed at Hours CAT scraper 2015     627K excellent 3,059 3,000 CAT Grader 2013     872GP excellent 5,801 5,800 John Deere Tractor 2014     6125M excellent 1648 1,648
Click here for more information.

Surplus Assets to the Ongoing Operations of Trinity Foods & Genesis Organics

September 2, 2020, 8:35 am

≫ Next: Online Only Auction- Ferrero Surplus Equipment Auction

≪ Previous: Cat & Deere Earth-Moving, Tractor Heavy Equipment Sale from Major Energy Company

$

0

0

Surplus Assets to the Ongoing Operations of Trinity Foods & Genesis Organics FOOD PROCESSING AND FACILITY SUPPORT AND AUXILIARY EQUIPMENT & MACHINERY
	Online Bidding Only Begins: Wednesday, September 23, 2020 at 10:00 AM CDT Location: 138 S Custer Street, Glenns Ferry, ID, US, 83623 Includes: Boilers, Condensers, GyroCompact Spiral Freezer, Stainless Steel Food Grade Tanks, Carton Erectors & More!
Removal & Rigging details to be added shortly. The inspection day is September 22nd by appointment only. Lots are in three separate locations so please email Riley at rileym@schneiderind.com to make sure you are going to the correct address of the desired lots. For any pre-auction bids or bulk bids please email Riley at rileym@schneiderind.com   Lot # Description  1 Allen Bradley Electrical Panel View Plus 1250 W/ AB PowerFlex VFO's 2 AccuRate Agitation Control Box, S/N #53900-01B8RWM, BOM #S300048 3 Ironman Incline Auger, Model #SS-HMQ-824-80-H1-56-23 4 Holac Cubixx100, Type #CUBIXX 1061, S/N #003-45-112 6 Anritsu Industrial Solutions X-Ray Inspection System & Rejector Conveyor, Model #KD7416AWH, S/N # 7 Incline Transfer Conveyor, Comes With a Yaskawa V1000 Control Box 8 Pallet Racking, Uprights, and Crossbeams 9 Spiral Freezer Stackable Conveyor Line 10 Frigoscandia GyroCompact Spiral Freezer 11 Pallet Racking, Uprights, and Crossbeams 13 Vibratory Conveyor 14 Feeding Conveyor, Approx 16ft. Long 15 Incline Transfer Conveyor, Approx. 2ft Wide Belt 16 Frigoscandia FloFreeze Spiral Freezer, 17 Spiral Freezer W/ Chilling Conveyor 18 FES Ammonia Compressor 19 FES Ammonia Compressor, Year Built 1999, S/N #99060 20 Cooling Water Tank, W/ 25 HP Baldor Motor 22 Air Compressor Tank 23 Water Softener Tanks 24 Morfab Ammonia Tank 25 Morfab Ammonia Tank 26 Hansen Auto-Purger, Model #AP08, Amps 3.0 27 FES Ammonia Compressor, 14661 Machine Hours, 28 FES Ammonia Compressor, 13224 Machine Hours 29 Accumulator Tank & Pump 30 Square D Model 4 Control Center 31 Square D Power-Styler Switchboard, Volts 480Y/277AC, Amps 2000, Hertz 60 32 Square D Power-Style Switchboard, Volts 480Y/277 Hertz 60 33 Square D Electrical Panel 34 Continental Automatic Boiler, S/N #F13B400D-5225-3G236, Rated Output (MBTU/HR) 13800 35 Cleaver-Brooks Automatic Boiler, (Missing the Nose, Cerafelt Gasket) 36 Feed Water Tank & Pump 37 US Electrical Pump & Motor 38 (2) Water Softeners Tanks 39 Pallet of Spare Parts, Includes Motors, Pump & More! 40 Pallet of Motors & Pumps, Including Reliance 41 Feed Pump & 15 HP Motor 42 (3) Smaller Motors & Pumps (5 HP Motors) 43 Toshiba 150 HP Motor 44 Pallet of Spare Parts & Pulleys For Conveyors 45 Pallet of Start Stop Boxes & 2-3 ft. Augers 46 Pallet of Motors & Pumps, Including US Electrical & Mitsubishi Motors 47 Pallet of Smaller Motors 48 (2) Desk with Cabinets 49 Krack Compressor, Model #KPRC/20 L5, S/N #291576, Panel Model #F445 50 Pallet with (2) Motors, Includes a 20 HP Baldor Motor, Frame #2561C 51 Pallet of Chiller Conveyor, Crimps & More! 52 (2) pallets of misc. spare parts 53 Hydac Hycon Divison Power Unit, Element Model Code #0330R010BN3HC, Attached Baldor 15 HP Motor 54 Gear Box 55 (2) Pallets with misc. spare parts, including Motors, Dayton Blowers & Pumps 56 Pump W/ Reefs Drive 57 US Electrical 40 HP Motor 58 Pallet of Electrical Motors 59 Pallet of Electrical Motors, Including Unimount 125 Motor 60 Power Transmission Hydraulic Power Unit, Model #Dual A10V-28-1500-25-160L, S/N #84906 61 Toshiba 40 HP Motor, Model #B0402FLG3UM, Type = TIKK 62 Pallet of Pumps & Misc. Spare Parts 63 (2) Boxes of Misc. Spare Parts, Pumps, Filters & Flow Meters 64 (2) Pallets of Spare Motors 65 (2) Pallets of spare motors (including Baldor), Filters 66 (2) Pallets of Misc. Pumps & Motors 67 (2) Pallets of Misc. Motors, Pumps & Other Spare Parts 68 Lightnin Dura-Mix Motor & Sterling 20 HP Motor 69 (3) Pallets of Spare Motors 70 Box of Spare Parts/Valves 71 (2) Tuskin Liquid Metering Pumps, Model #TC-350N, S/N #577N 72 (2) Pallets of Spare Parts & Flanges 73 Dunham-Bush Brunner, Model #W-500M5FH, Type #R11K 74 (2) Pallets of Misc. Motors 75 (3) Pallets/Boxes of Misc. Spare Parts 76 Metal Boxes 77 (3) pallets of Misc. Spare parts, including motors, dual-headed pumps, and electrical boxes 78 (3) Pallets of Misc. Motors & Pumps 79 Chilling Unit (AD) 80 Mercury Chilling Unit (AD) 81 Dual Pump W/ Attached Pipe 82 Pallet w/ Piping & rolled-up mat 83 Pallet of Misc. Motors & Pumps 84 Pallet of Misc. Motors & Pumps 85 Pallet of Misc. Motors & Pumps 86 Pallet of Misc. Spare Parts (AD) 87 Pallet of Misc. Pump & Motor 88 Optima Scale, Model #OP-901A & (2) Wheels of packing paper 89 Mufflers for Blower Packages 90 Box of Plastic Fittings, Various Shapes & Sizes 91 (2) Pallets of Motors, Including a 5HP Teco 3-Phase Induction Motor & Baldor Motor 92 SWF Carton Erector, Model #DP260-C2200, S/N #SWF10224-SWF10225, Year Manufactured 2004¾(AD) 93 Hill Chilling Compressor 94 (3) Pallets of Misc. Motors, Blowers & Pumps. Includes a 3 HP Lincoln A.C. Motor 95 Pallet of Misc. Spare Parts 96 Wheeled Pump & Motor 97 (2) Pallets of P&H & Budget Chain Hoist 98 (2) Blue Platforms and a hose 99 Pallet of Misc. Motors 100 Reeves Pump & Reliance Drive Motor 101 (3) Pallets of Misc. Motors & Pumps, Including Parts of an ITT Pneumotive Oil-less Air Compressor/ 102 Urschel Dicer Parts Machine 103 RefrigerationChilling Unit (AD) 104 Bohn Condenser Unit, Model #FL-3303G, S/N #DRD 04765 105 Larkin Condenser Unit, Model #MT-561 106 GW Bohn Condenser Chilling Unit, Model #FL3303B, S/N #DCE0445 107 Larkin Condenser Unit 108 Bohn Condenser Unit, Model #FL-3303B, S/N #DCE 0447 109 Bohn Condenser Unit, Model #FL-3303B, S/N #DCE 0446 110 Krack Condenser Unit, Model #GA-1300-D, S/N #183993 111 Urschel Labs Cutting Dicer, Model #G-A, S/N #3068 112 Recold Condenser Unit 113 Recold Condenser Unit 114 Bohn Condensor Unit, Model #FL-3303G, S/N #DRD 04764 115 Bohnametic Condenser Unit, Model #CBH10L5HA-23, S/N #D40-768F76 116 Krack Condenser Unit, Model #BTX2G-540-HR-F12, S/N #291584 117 (2) Krack Condenser Units, Model #DT2C-415-DXF-EDL 118 (4) Pallets of Misc. Spare Parts 119 Approx. 20-25ft Metal Auger 120 Approx. 20-25ft Metal Auger 121 Approx. 15-20ft Metal Auger 122 Auger w/ Feed Bin 123 Smaller Auger w/ Drive Motor 124 Stainless Steel Auger 125 Auger w/ Drive Motor, comes with Stand 126 Stainless Steel Auger 127 Stainless Steel Auger 128 Stainless Steel Auger w/ Bin and Drive Motor 129 Stainless Steel Auger 130 Carted Stainless Steel Auger w/ Feed Bin 131 Metal Tube 132 Metal Tube with Piping Inside of It 133 Metal Tubing 134 Vibrating Hopper Conveyor 135 Reliance Electric 5 HP Motor & Pump 136 Flume Tank 137 (2) Continental Boiler Fans 138 Dump Hopper 139 Racking 140 Blue Racking 141 Racking 142 Bagger Frame Components 143 Bagger Components 144 Submersible Product Conveyor 145 Auger with Heating Tank 146 Stainless Steel Tank 147 Condenser 148 Bohn Refrigeration Unit, Model #FL3303B, S/N #DCE0446 149 (2) Condenser Units 150 Mixing Auger 151 Conveyor Frame 152 (2) Racking Units 153 Large Exiter 154 Buflovak Drum Dryer, S/N #18263, DOM 1989, Drum Dimension: 5x10', 140 psi, Main Drum is cast iron 155 Buflovak Drum Dryer, S/N #17235 156 Buflovak Drum Dryer 157 Golden Eagle Micro Scan 158 Odenberg Electrical Panel 159 Remains of a Packaging Unit 161 Rolling Conveyor 162 Packaging Table 163 3M-Matic Case Sealing Machine 164 Eriez Magnetics Vibrating Hopper, Model #VMC19X60 165 Case Sealing Machine 166 3M-Matic Case Sealing Machine 167 Bel 252 Case Sealing Machine, Model #252-031280 168 Rolling Conveyor 169 Rotary Scale Parts 170 (2) Belted Conveyors, The Blue conveyor is elevated and slightly inclined 171 (2) Urschel Dicer Parts 172 (2) Staired Catwalk 173 Elevated Feeding Hopper 174 Feed Conveyor 175 Pallet of Misc. Pumps 176 (2) Stainless Steel Kettles 177 Allen Bradley Motor Control Center 178 Food Processing Infeed Table 179 Vibrating Conveyor 180 VibraFree Vibrating Conveyor, Model #V-F, S/N #950164 181 (2) Imeco Chilling Units, Model #F0418-84, S/N #6253A-3RH & 6253A1LH 183 Parker Boiler, Model #T-1730, S/N #40220, Year Built 1991 184 15 KW Mobile Generator 185 (2) Fork Lifts, Partially Stripped for Spare Parts 187   188 Parker Boiler, Model #T-1730, S/N #43908, Year Built 1994 189 Pallet of Siemens Electrical Boxes 190 Pallet of Misc. Motors 191 Box of Misc. Couplings 192 Pump System 193 Box Fan 194 Pallet of Misc. Spare Parts 195 Box of Rollers 196 Compressor 197 Trinity Industries Compressor Tank (250 PSI at 125 Degrees F*) 198 Pallet of Metal Rods 199 Compressor Tank Attached to Box Frame & 21.5ft Long Metal Pipe. (AD) 200 Compressor Tank, Approx. 14ft L x 4ft W 201 Compressor Tank, Approx. 12ft L x 4ft W 202 Compressor Tank, Approx. 14ft L x 4ft W 203 Compressor Tank in Box Frame, Approx. 15ft L x 7ft. W x 6ft. T 204 Sandfilter Vacuum Pump 205 Paneling for Spiral Freezer 206 Water Cooling Tank 207 DCI Stainless Steel Food Grade Tank, Approx. 24ft. T x 7ft. W, Model #C96-D-5136-A, Capacity 3000 208 DCI Stainless Steel Food Grade Tank, Approx. 24ft. T x 7ft. W 209 Oil Tank 210 Reeves De Laval Pump & Drive Motor 211 Feed Pump W/ Piping 212 Incline Conveyor & Hopper, Approx 17ft. L x 10ft. W x 12-13ft T 213 Pump System Skid 214 National Metal Shear 215 Baghouse & Dry Bagging Silo, 25 Socks 96'' Long 216 HSC Jet Baghouse & Dry Bagging Silo, Model #72W48, S/N #912-F-127, 48 Socks/72'' L 217 Baghouse & Dry Bagging Silo, 48 Socks/48'' L 218 Evapco Chilling Unit, Model #PMCB630, S/N #998494, Belt #2B128 219 Imeco Chilling Unit 220 Misc. Spare Parts & Piping 221 Spiral Freezer Coils Unit 223 Incline Auger and Drive Motor 224 Baghouse Silo (AD) 225 Incline Auger and Drive Motor 226 Kice Baghouse Silo 227 General Electric Electrical Panel 300 Line Control 300 Automatic Carton Erector 301 Mettler Toledo Hi-Speed Scale, Model Beltweigh XC 302 Blue Cabinet w/ Assorted Spare Parts & Hand Tools 303 Fume Hood 305 Stainless Steel Food Grade Tank, Approx 25ft T x 7-8ft W x 7-8ft L 306 Heat & Control Boiler (Used to heat oven Lot 307) 307 Heat & Control Oven, Model #3PF-3620, S/N #195-0169, HZ 60, Approx. 25-26ft. L x 9ft H x 6.5-7ft. W 308 Airtac Pneumatic Pump & Cylinder, Model #SC63X300-S 309 Strippit Super 30/30 DI-Acro, Model #62000-00, S/N #101142369, Volts 460 310 Gas Tanks & Storage Cage, Comes W/ Filling Apparatus, Qty. 23 311 Automatic Carton Erector 312 Jasa Packaging Unit, Model #350, S/N #11024, 230 Volts 313 Triangle Bagger Parts Machine, With a Markem Smart Date S Packaging Unit 314 Triangle Bagger Parts Machine, With a Markem Smart Date S Packaging Unit 316 ABCO Blancher, S/N #0-30519-06, Approx. 26-27ft L x 9ft W x 8ft. H (AD) 317 Stein Thermofin Fryer, Belt Width: 42'', Usable Belt Width: 38.8'', Approx. 258.25'' L x 94'' W 317A Stein Fryer FIlter 318 Skid Mounted Fulton Boiler, (Heater, Tank & Pump) Model #FT-0160-C, S/N #1431-C 319 Skid Mounted Fulton Boiler, (Heater, Tank & Pump) 320 Fulton Boiler Parts, Model #FT-0160C, S/N #814JC, Max Operating Temp. 650F 321 Cookson Roll Up Door 322 Metal Cart w/ metal piping inside 323 Oil Recovery System 324 (6) Motors, Including a 50HP JRP Energy Efficient Electric Motor 325 Water Cooling Tank 326 Metal Hood 327 Feeding Bin w/ Incline Auger, Attached Winsmith 926 Speed Reducer 328 Duckworth 329 Material Processing Table 330 Positive Displacement Pump (APV) & 1.5 HP Motor, Cat No. VWDM3554T 331 Guard Railing 332 Dayton 1.1 HP Motor & Pump, Volts 208, HZ 60 333 Auger W/ Drive Motor & Pump 334 (1) Baltimore Aircoil Co. Heating Units, Model #VC1-125, S/N #UO4152080, Belt No. B-75, (1) Modine 335 Reliance Electric Motor, Dayton Industrial 1.1HP Motor & Pump (AD) 337 Better Built Heavy Duty Fluid Transfer Tank, Model #29224164, S/N #AN0252138, Capacity 100 Gallons & 338 Newtec Filling Apparatus, Model #2009PCB-26, Year 2003, S/N #6937 339 Incline Conveyor w/ Submersible Tank 340 (4) Pallets of Metal Conveyor Rolls 341 (2) Box of Plastic Conveyor Rolls 342 Baldor SuperE Reliance Motor, HP 7.5, Frame 213TC Power Unit 343 Large Electric Motor 344 (2) RXF Electrical Boxes & Small Motor 345 Frick Rotary Screw Compressor, Model/SN #XJF151403021, DOM 2001 346 25HP Dayton Electric Motor, Volts 190/380, RPM #2940 & Roto-Jet Pump, Model #R-11. S-252 347 Rotary Screw Compressor 348 Gardner Denver Air Compressor, Model #VR7F-8, S/N #D121948 349 Speed Control System 350 Material Processing Conveyor, Comes W/ Marathon 1.75 HP PowerWash Motor 351 Holding Tank W/ Pumps 352 Incline Conveyor w/ Material Storage Bin 353 Parts of Blueprint Automation Case Packer 354 Material Processing Conveyor 355 Vibratory Conveyor Into Grinders 356 Wexxar Carton Erector Packaging Machine 357 Catwalk 358 (3) Screened Material Dividers 359 Inclined Material Processing Dual Lined Conveyor, S/N #10982, DOM 1997 360 Stainless Steel Material Bin 361 Stainless Components 362 Incline Auger 363 Material Bin w/ Incline Processing Conveyor 364 Metal Roll Cage 365 Funneling Bin 366 Dual Lined Processing Conveyor 367 Vibra-Flex Vibrating Conveyor from Meyer 368 Funneling Apparatus Into Incline Conveyor 369 Conveyor Components 370 CHL Incline Material Processing Conveyor, Model #INT8COX44-7, S/N #041177499100 371 Vibratory Conveyor & Spare Parts 372 Material Processing Table 373 Stainless Steel Kettle & Top 374 Incline Material Processing Conveyor 375 Material Processing Bin & Auger 376 Galvanized Box 377 Highlight Synergy 2.5 Stretch Wrapper 378 Material Processing Bin W/ Roll Cage 379 Material Processing Conveyor 380 Incline Auger 381 (2) Material Processing Conveyors 382 Misc. Spare Parts & Couplings 383 E-Pak 4-Headed Bottle Filler, S/N #0813-33735-208-004 384 Water Softener Tanks 385 Water Cooling Tank 386 Tote Dump (Missing Hydraulic Components) 387 AD Burnham ES2 Boiler IQ Control System 388 AD Atlas Launder-Ometer 389 Marathon 25 HP Motor, Frame #284-T 390 Material Processing Conveyor Spare Parts 391 Material Processing Screened Conveyor 392 Inclined Conveyor 393 Conveyor Framing 394 Rolling Conveyor 395 Hopper & Components 396 Incline Material Processing Conveyor 397 Material Processing Conveyor 398 Material Processing Conveyor Frame 399 Conveyor Belt 400 The frame of an Abrasive Peeler 401 Raised Catwalk W/ Spare Piping 402 Inclined Material Processing Conveyor Frame & Product Bin 403 Material Processing Conveyor 404 Catwalk 405 Tote Dump 406 Stainless Steel Raised Material Bin W/ Auger Attachment 407 Round Metal Food Bins 408 Elevated Catwalk 409 (2) Inclined Material Processing Conveyors 410 Kerian Speed Sizer 411 Abrasive Peeler Components 412 Abrasive Peeler Components 413 Lock Digital Detection Metal Check 30 CXE, (Sealed to IP54) 414 Blower Package System, Mufflers, Cyclone 415 Bronco 416 Lee Industries EE Kettle Cooker, S/N #35799-1, Year Built 2004 417 Blower Package W/ Hopper & Components 420 Urschel Dicer
Click here for more information.